Effect of the Annealing Treatment on the Microstructure and Properties of TC4 Titanium Alloy TIG and Laser-Welded Joints
Metals · 13.04.2026 · 16 (4) · 424
DOI: 10.3390/met16040424 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 13.04.2026. Verfasst von Yansong Wang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study compares the microstructural evolution and mechanical properties of TC4 (Ti-6Al-4V) titanium alloy joints welded by Tungsten Inert Gas (TIG) and laser processes, following a post-weld annealing treatment at 650 °C for 2 h. Distinct microstructures were obtained: the TIG-welded joint developed a heterogeneous mixture of short-rod α and lamellar β, while the laser-welded joint formed a more homogeneous equiaxed α structure with uniformly distributed β-phase nanoparticles. Electron backscatter diffraction (EBSD) results confirmed that the annealing treatment significantly weakened the strong welding-induced texture and disrupted the epitaxial growth mode of columnar grains. Mechanical testing demonstrated that annealing improved the strength-toughness balance, but the extent and mechanism differed between the two processes. For the TIG-welded joint, the ultimate tensile strength slightly decreased, while elongation and impact toughness increased by 18% and 10.4%, respectively. In contrast, the laser-welded joint maintained its original strength while achieving greater improvements in ductility and toughness, with elongation and impact toughness increasing by 20% and 15.2%, respectively. This divergence is attributed to insufficient recrystallization and the persistence of residual coarse grains, limiting the TIG joint’s performance. However, in the laser-welded joint, the pinning effect of β-phase nanoparticles and associated grain refinement enhanced ductility without compromising strength.
Zitieren
APA
Wang, Y., Xu, Y., Li, J., Lan, X., Song, D., & Qiao, Y. (2026). Effect of the Annealing Treatment on the Microstructure and Properties of TC4 Titanium Alloy TIG and Laser-Welded Joints. Metals, 16(4), 424. https://doi.org/10.3390/met16040424
Vancouver
Wang Y, Xu Y, Li J, Lan X, Song D, Qiao Y. Effect of the Annealing Treatment on the Microstructure and Properties of TC4 Titanium Alloy TIG and Laser-Welded Joints. Metals. 2026;16(4):424. doi:10.3390/met16040424
BibTeX
@article{Wang2026,
author = {Wang, Yansong and Xu, Yulang and Li, Jingyong and Lan, Xuzhi and Song, Dan and Qiao, Yanxin},
title = {Effect of the Annealing Treatment on the Microstructure and Properties of TC4 Titanium Alloy TIG and Laser-Welded Joints},
journal = {Metals},
year = {2026},
volume = {16},
number = {4},
pages = {424},
doi = {10.3390/met16040424}
}
EUVIMED