Melt Pool Imaging in Metal Additive Manufacturing Processing
Metals · 08.04.2026 · 16 (4) · 409
DOI: 10.3390/met16040409 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 08.04.2026. Verfasst von Andrei C. Popescu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Romanian Ministry of Research, Innovation, and Digitalization.
Abstract (Originalsprache)
Additive manufacturing has recently become a key enabling technology in industrial fields, ranging from customized products for everyday usage to aerospace applications and small-batch industrial tooling. The future prospects extend up to the biofabrication of human organs. Ensuring the quality and repeatability of this process requires a systematic and comprehensive investigation of the underlying physical phenomena. In particular, melt-pool evolution is a critical feature, since irregularities in its spatial profile can influence microstructural evolution and weaken the integrity of the manufactured part. Microscale defects arising from balling and keyhole phenomena, often associated with recoil pressure, can severely degrade the quality of the resulting scanned track. This paper reviews the current state of optical approaches for melt-pool characterization and feature monitoring relevant to industrial laser additive manufacturing for process control and quality improvement, with a special focus on pyrometry and high-speed imaging. A single high-speed camera was generally used in experiments for melt-pool feature extraction, but two cameras were used to bypass emissivity values, which are otherwise difficult to obtain. Mathematical models were introduced to provide complementary information about melt-pool features, while artificial intelligence algorithms were used in other cases to process optical information. New melt-pool imaging databases and classifiers are expected in the near future to enable fast selection of appropriate process parameter windows, eliminating costly trial-and-error experiments.
Förderung
- Romanian Ministry of Research, Innovation, and Digitalization
Zitieren
APA
Popescu, A. C., Mihai, S., Toma, P. V., Bunea, A., Rusu, A., Anghel, S. A., & Mihailescu, I. N. (2026). Melt Pool Imaging in Metal Additive Manufacturing Processing. Metals, 16(4), 409. https://doi.org/10.3390/met16040409
Vancouver
Popescu AC, Mihai S, Toma PV, Bunea A, Rusu A, Anghel SA, et al. Melt Pool Imaging in Metal Additive Manufacturing Processing. Metals. 2026;16(4):409. doi:10.3390/met16040409
BibTeX
@article{Popescu2026,
author = {Popescu, Andrei C. and Mihai, Sabin and Toma, Petru Vlad and Bunea, Alexandru-Ionuț and Rusu, Andrei-Cosmin and Anghel, Sînziana Andreea and Mihailescu, Ion Nicolae},
title = {Melt Pool Imaging in Metal Additive Manufacturing Processing},
journal = {Metals},
year = {2026},
volume = {16},
number = {4},
pages = {409},
doi = {10.3390/met16040409}
}
EUVIMED