EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Microstructure on the Water Embrittlement of Dual-Phase Austempered Ductile Irons

Petar Janjatović, Olivera Erić Cekić, Sebastian Baloš, Miloš Knežev, Miroslav Dramićanin, Jasmina Grbović Novaković, Dragan Rajnović

Metals · 25.03.2026 · 16 (4) · 364

DOI: 10.3390/met16040364 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 25.03.2026. Verfasst von Petar Janjatović und 6 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Faculty of Technical Sciences, University of Novi Sad, Ministry of Science, Technological Development, and Innovation of the Republic of Serbia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effect of microstructure on water-induced embrittlement of dual-phase austempered ductile iron (ADI). Dual-phase ADI materials were produced by austenitization at 780, 800, 820, and 840 °C followed by austempering at 400 °C/1 h, resulting in microstructures composed of varying fractions of free ferrite and ausferrite. Tensile properties were evaluated under dry conditions and in distilled water. The embrittlement zones were observed in all samples investigated; however, they were not critical in all cases. The results indicate that free ferrite is less sensitive to water-induced embrittlement, whereas increasing ausferrite content promotes the formation and growth of the embrittlement zone. Elongation was identified as the most sensitive mechanical parameter, showing statistically significant reductions of up to ~80% for microstructures containing more than ~65% ausferrite, while proof strength remained largely unaffected. Fracture surface analysis revealed fatigue-like striation features within the embrittlement zone, indicating cyclic crack initiation and propagation. Based on correlations between tensile behavior, fracture morphology, and microstructural features, a water-induced embrittlement mechanism involving cyclic local chemisorption and surface-initiated crack growth is proposed. These findings highlight the critical roles of phase type, volume fraction, and spatial distribution in controlling the resistance of dual-phase ADI to embrittlement in aqueous environments.

Förderung

  • Faculty of Technical Sciences, University of Novi Sad
  • Ministry of Science, Technological Development, and Innovation of the Republic of Serbia

Zitieren

APA

Janjatović, P., Cekić, O. E., Baloš, S., Knežev, M., Dramićanin, M., Novaković, J. G., & Rajnović, D. (2026). The Effect of Microstructure on the Water Embrittlement of Dual-Phase Austempered Ductile Irons. Metals, 16(4), 364. https://doi.org/10.3390/met16040364

Vancouver

Janjatović P, Cekić OE, Baloš S, Knežev M, Dramićanin M, Novaković JG, et al. The Effect of Microstructure on the Water Embrittlement of Dual-Phase Austempered Ductile Irons. Metals. 2026;16(4):364. doi:10.3390/met16040364

BibTeX
@article{Janjatovi2026,
  author = {Janjatović, Petar and Cekić, Olivera Erić and Baloš, Sebastian and Knežev, Miloš and Dramićanin, Miroslav and Novaković, Jasmina Grbović and Rajnović, Dragan},
  title = {The Effect of Microstructure on the Water Embrittlement of Dual-Phase Austempered Ductile Irons},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {4},
  pages = {364},
  doi = {10.3390/met16040364}
}
Kostenlos starten →