EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of High-Pressure Roll Grinding and Damp-Milling Pretreatment on the Reduction Performance of Fired Pellets

Minglei Gao, Xiangci Xue, Deqing Zhu, Lanjie Li, Heng Ji, Renguo Li, Yaobin Wang, Zhonghua Wang

Metals · 10.03.2026 · 16 (3) · 307

DOI: 10.3390/met16030307 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 10.03.2026. Verfasst von Minglei Gao und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China’s key R&D program project China-Serbia “Belt and Road” joint laboratory construction and joint research project for green steel manufacturing, Key Technology Development and Application for Improving the Total Ball Ratio of Hydrogen Metallurgy DRI in HBIS Group’s “Ranking and Leading” Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The growing demand for direct reduced iron (DRI) in green steel production requires high-quality fired pellets as the burden for the gas-based shaft furnace direct reduction process. However, the properties of magnetite concentrate as pellet feed present a significant impact on the quality of fired pellets, especially the metallurgical performance. A systematic study of the effect of pretreating the magnetite concentrate on the properties of fired pellets was conducted using two pretreatment technologies, i.e., damp-milling and high-pressure roll grinding (HPRG). Green balls were made from pretreated magnetite concentrates and fired under optimal conditions. Their performance was then evaluated in a laboratory-scale setup simulating the HYL shaft furnace environment. Key metrics included cold compressive strength (CCS), reducibility index (RI), reduction swelling index (RSI), and dynamic low-temperature reduction degradation (LTD). The pretreatment of magnetite concentrates with HPRG twice showed significant benefits. The fired pellets not only have a CCS of 2500 N/p at a roasting temperature 150 °C lower, but also achieve an RI of 3.37 and an RSI of 3.15%, respectively. Furthermore, the reduction degradation tendency was markedly reduced; the +6.3 mm fraction reached 94.72% with a whole pellet ratio of 75.49%. Conversely, while damp-milling improved the LTD, it required a 100 °C increase in preheating temperature and yielded a whole pellet ratio of only 49.15%, failing to meet industrial requirements. The improvement in metallurgical performance is attributed to the intense micro-cracking induced by the two-pass HPRG process, which optimizes the particle size distribution, specific surface areas and improves the microstructure and pore properties of the fired pellets.

Förderung

  • China’s key R&D program project China-Serbia “Belt and Road” joint laboratory construction and joint research project for green steel manufacturing
  • Key Technology Development and Application for Improving the Total Ball Ratio of Hydrogen Metallurgy DRI in HBIS Group’s “Ranking and Leading” Project

Zitieren

APA

Gao, M., Xue, X., Zhu, D., Li, L., Ji, H., Li, R., Wang, Y., & Wang, Z. (2026). The Effect of High-Pressure Roll Grinding and Damp-Milling Pretreatment on the Reduction Performance of Fired Pellets. Metals, 16(3), 307. https://doi.org/10.3390/met16030307

Vancouver

Gao M, Xue X, Zhu D, Li L, Ji H, Li R, et al. The Effect of High-Pressure Roll Grinding and Damp-Milling Pretreatment on the Reduction Performance of Fired Pellets. Metals. 2026;16(3):307. doi:10.3390/met16030307

BibTeX
@article{Gao2026,
  author = {Gao, Minglei and Xue, Xiangci and Zhu, Deqing and Li, Lanjie and Ji, Heng and Li, Renguo and Wang, Yaobin and Wang, Zhonghua},
  title = {The Effect of High-Pressure Roll Grinding and Damp-Milling Pretreatment on the Reduction Performance of Fired Pellets},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {3},
  pages = {307},
  doi = {10.3390/met16030307}
}
Kostenlos starten →