EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low-Alloy Ultra-High Strength Cast Steels Prepared by a Quenching–Partitioning–Tempering Treatment

Xueyi Fan, Yu Chen, Yihe Tian, Shiquan Du, Zhifeng Wang

Metals · 04.03.2026 · 16 (3) · 289

DOI: 10.3390/met16030289 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 04.03.2026. Verfasst von Xueyi Fan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Research Project of Hebei Education Department, China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To synergistically enhance the strength and toughness of low-alloy cast steels, a quenching–partitioning–tempering (Q-P-T) heat treatment process was specifically performed based on the “Constrained Carbon Equilibrium” thermodynamic model. The effects of partitioning temperature on microstructure and mechanical properties were examined. The Q-P(210)-T approach successfully produced an ultra-high strength cast steel (48SiNiMnCrMoAl6-4-4-3-8-14) with a tensile strength exceeding 2000 MPa and an elongation greater than 19.0%. The microstructure of this cast steel consists of tempered martensite (TM), bainite, ferrite, and retained austenite (RA). During tensile deformation, dislocations from adjacent martensite are absorbed by the film-like RA, thereby alleviating stress concentration induced by dislocations. Meanwhile, the transformation-induced plasticity (TRIP) effect of the RA significantly enhances the toughness of the cast steel. Furthermore, the ultra-high strength of the cast steel is jointly ensured by the fine crystalline strengthening of the martensite and the precipitation strengthening of the transitional carbides in the microstructure of the cast steel. This work provides a good reference for the development of high-performance cast steels.

Förderung

  • Science Research Project of Hebei Education Department, China

Zitieren

APA

Fan, X., Chen, Y., Tian, Y., Du, S., & Wang, Z. (2026). Low-Alloy Ultra-High Strength Cast Steels Prepared by a Quenching–Partitioning–Tempering Treatment. Metals, 16(3), 289. https://doi.org/10.3390/met16030289

Vancouver

Fan X, Chen Y, Tian Y, Du S, Wang Z. Low-Alloy Ultra-High Strength Cast Steels Prepared by a Quenching–Partitioning–Tempering Treatment. Metals. 2026;16(3):289. doi:10.3390/met16030289

BibTeX
@article{Fan2026,
  author = {Fan, Xueyi and Chen, Yu and Tian, Yihe and Du, Shiquan and Wang, Zhifeng},
  title = {Low-Alloy Ultra-High Strength Cast Steels Prepared by a Quenching–Partitioning–Tempering Treatment},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {3},
  pages = {289},
  doi = {10.3390/met16030289}
}
Kostenlos starten →