EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Mechanical Properties of Al-Mg-Zn-Er-Zr Alloy via Multi-Pass Metal Inert Gas (MIG) Welding

Haoran Che, Wu Wei, Feiran Zhang, Jieming Gao, Li Cui, Ying Han, Ting Li, Hui Huang, Shengping Wen, Wei Shi, Zuoren Nie

Metals · 03.03.2026 · 16 (3) · 286

DOI: 10.3390/met16030286 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 03.03.2026. Verfasst von Haoran Che und 10 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Advanced Materials-National Science and Technology Major Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The microstructure and mechanical properties of the joint of a novel Al-Mg-Zn-Er-Zr alloy fabricated by multi-pass MIG welding using ER5E61 filler wire were investigated first. The results show that multi-pass MIG welding induces heterogeneous grains in the weld metal: equiaxed grains, columnar grains, and cover-pass feather-like grains. The weld metal exhibits coarse grains (45.81 ± 19.68 μm), a high proportion of high-angle grain boundaries (83.3%), and a low dislocation density compared with the base metal. The joint achieves 316 MPa ultimate tensile strength, 10.5% elongation, and 0.80 joint efficiency with minimum hardness (77.2 HV) in the weld metal. Strengthening mechanism analysis reveals that joint softening mainly stems from the disappearance of deformed structure, reduced dislocation density, and the coarsening and reduction in Al3(Er, Zr) nanophases. Diffuse precipitation of the Al3(Er, Zr) nanophases (19.61 nm, 0.53%) under multi-pass MIG welding compensates for the softening of the welded joint, leading to the retention of high tensile strength despite marked hardness loss, thus demonstrating effective strength preservation.

Förderung

  • Advanced Materials-National Science and Technology Major Project

Zitieren

APA

Che, H., Wei, W., Zhang, F., Gao, J., Cui, L., Han, Y., Li, T., Huang, H., Wen, S., Shi, W., & Nie, Z. (2026). Microstructure and Mechanical Properties of Al-Mg-Zn-Er-Zr Alloy via Multi-Pass Metal Inert Gas (MIG) Welding. Metals, 16(3), 286. https://doi.org/10.3390/met16030286

Vancouver

Che H, Wei W, Zhang F, Gao J, Cui L, Han Y, et al. Microstructure and Mechanical Properties of Al-Mg-Zn-Er-Zr Alloy via Multi-Pass Metal Inert Gas (MIG) Welding. Metals. 2026;16(3):286. doi:10.3390/met16030286

BibTeX
@article{Che2026,
  author = {Che, Haoran and Wei, Wu and Zhang, Feiran and Gao, Jieming and Cui, Li and Han, Ying and Li, Ting and Huang, Hui and Wen, Shengping and Shi, Wei and Nie, Zuoren},
  title = {Microstructure and Mechanical Properties of Al-Mg-Zn-Er-Zr Alloy via Multi-Pass Metal Inert Gas (MIG) Welding},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {3},
  pages = {286},
  doi = {10.3390/met16030286}
}
Kostenlos starten →