Improving Printability and Strength–Ductility Synergy in Additively Manufactured IN738 Alloy via Co Addition
Metals · 26.12.2025 · 16 (1) · 27
DOI: 10.3390/met16010027 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 26.12.2025. Verfasst von Sujun Lu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Major Science and Technology Project of Gansu Province, the Planning Program for Industry Support of University in Gansu Province, the program for Hong Liu Excellent Young Scholars by Lanzhou University of Technology in 2023.
Abstract (Originalsprache)
An IN738 alloy with a high Al and Ti contents induces a significant cracking tendency during laser powder bed fusion (LPBF) processing, leading to a mismatch between printability and mechanical properties. Modification of alloy compositions is an effective strategy to enhance the printability and mechanical properties of nickel-based superalloys via LPBF. In this study, the effects of adding 5 wt.%Co on the printability and mechanical properties of LPBF-fabricated IN738 were investigated by using three-dimensional high-resolution micro-computed tomography (micro-CT), electron backscatter diffraction (EBSD), and quasi-static room-temperature tensile tests. The results show that adding 5 wt.%Co can significantly reduce the defect rate and defect size of the LPBF-fabricated IN738 alloy, remarkably improve alloy densification, and optimize printability. Meanwhile, compared with the LPBF-fabricated IN738 alloy, the 5 wt.%Co-IN738 alloy exhibits an excellent balance of strength and ductility in horizontal and vertical directions, both LPBF-fabricated and heat-treated. These results are anticipated to offer valuable guidance for the development of LPBF-fabricated Ni-based superalloys that achieve a favorable balance between printability and mechanical properties.
Förderung
- the Major Science and Technology Project of Gansu Province
- the Planning Program for Industry Support of University in Gansu Province
- the program for Hong Liu Excellent Young Scholars by Lanzhou University of Technology in 2023
- the Young PhD Support Program of Gansu Provincial Department of Education
- the Basic Public Welfare Research Projects in Wenzhou city
- the Science Foundation for Youths in Gansu Province
- the Youth Science and Technology Talent Innovation Project in Lanzhou City
Zitieren
APA
Lu, S., Gao, Y., Wang, H., Xu, J., Duan, J., & Ding, Y. (2025). Improving Printability and Strength–Ductility Synergy in Additively Manufactured IN738 Alloy via Co Addition. Metals, 16(1), 27. https://doi.org/10.3390/met16010027
Vancouver
Lu S, Gao Y, Wang H, Xu J, Duan J, Ding Y. Improving Printability and Strength–Ductility Synergy in Additively Manufactured IN738 Alloy via Co Addition. Metals. 2025;16(1):27. doi:10.3390/met16010027
BibTeX
@article{Lu2025,
author = {Lu, Sujun and Gao, Yubi and Wang, Huanhuan and Xu, Jiayu and Duan, Junling and Ding, Yutian},
title = {Improving Printability and Strength–Ductility Synergy in Additively Manufactured IN738 Alloy via Co Addition},
journal = {Metals},
year = {2025},
volume = {16},
number = {1},
pages = {27},
doi = {10.3390/met16010027}
}
EUVIMED