EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Formation and Characterization of Ti-Al Intermetallic and Oxide Layers on Ti6Al4V as Interlayers for Hydroxyapatite Coatings

Stefan Alexandru Laptoiu, Marian Miculescu, Diana Enescu, Iulian Antoniac, Florin Miculescu

Metals · 21.10.2025 · 15 (10) · 1159

DOI: 10.3390/met15101159 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 21.10.2025. Verfasst von Stefan Alexandru Laptoiu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores a novel approach to enhance the surface properties of Ti-Al alloys for biomedical applications by creating a compositional gradient layer through aluminum deposition using Electrical Discharge Machining (EDM). The primary goal was to develop a metallurgically bonded intermetallic zone that supports strong adhesion and improved compatibility for subsequent hydroxyapatite (HA) deposition. Aluminum was deposited onto a Ti6Al4V substrate via EDM under controlled conditions, followed by thermal and thermochemical treatments to induce diffusion and intermetallic phase formation. Comprehensive analyses using optical and electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and X-ray diffraction (XRD) revealed the formation of well-adhered layers composed of complex Ti-Al intermetallics such as TiAl2 and TiAl3, along with oxide phases including TiO2 and Al2O3. Thermal and thermochemical treatments further improved surface hardness, reaching up to 1057 HV, and influenced the diffusion behavior of aluminum, titanium, and vanadium. Adhesion tests confirmed that the untreated and thermochemically treated layers exhibited superior mechanical stability, while thermal treatment alone led to brittleness and delamination. These findings demonstrate that a properly engineered intermediate aluminide layer can significantly improve the performance of bioceramic coatings, particularly HA, by providing enhanced structural integrity and biocompatibility.

Zitieren

APA

Laptoiu, S. A., Miculescu, M., Enescu, D., Antoniac, I., & Miculescu, F. (2025). Formation and Characterization of Ti-Al Intermetallic and Oxide Layers on Ti6Al4V as Interlayers for Hydroxyapatite Coatings. Metals, 15(10), 1159. https://doi.org/10.3390/met15101159

Vancouver

Laptoiu SA, Miculescu M, Enescu D, Antoniac I, Miculescu F. Formation and Characterization of Ti-Al Intermetallic and Oxide Layers on Ti6Al4V as Interlayers for Hydroxyapatite Coatings. Metals. 2025;15(10):1159. doi:10.3390/met15101159

BibTeX
@article{Laptoiu2025,
  author = {Laptoiu, Stefan Alexandru and Miculescu, Marian and Enescu, Diana and Antoniac, Iulian and Miculescu, Florin},
  title = {Formation and Characterization of Ti-Al Intermetallic and Oxide Layers on Ti6Al4V as Interlayers for Hydroxyapatite Coatings},
  journal = {Metals},
  year = {2025},
  volume = {15},
  number = {10},
  pages = {1159},
  doi = {10.3390/met15101159}
}
Kostenlos starten →