EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Emissivity Measurements of Metals Used in Wire-Arc-Directed Energy Deposition Processes

Kevin Mullaney, Ralph P. Tatam

Metals · 26.09.2025 · 15 (10) · 1078

DOI: 10.3390/met15101078 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 26.09.2025. Verfasst von Kevin Mullaney und 1 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council (EPSRC), UK.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate temperature measurement is a key parameter that determines the quality of additive manufactured components in directed energy deposition processes. Optical pyrometers which are used to provide in-process temperature data require accurate emissivity data of the metal surface. Process-specific emissivity data for metals used in these processes is not readily available. This paper provides the emissivity of a variety of metals used in wire-arc directed energy deposition processes. For the first time, the test samples were fabricated using typical deposition processes and systems. The metals evaluated were titanium alloy (Ti-6Al-4V), Inconel 718, mild steel, aluminum alloy 2319, and nickel aluminum bronze. At ambient temperature, the measured normal emissivity was 0.26–0.28 for Ti-6Al-4V; for Inconel 718, it was 0.45–0.54; for mild steel, it was 0.4–0.72; for aluminum 2319, it was 0.14; and for nickel aluminum bronze, it was 0.35. The approximate emissivity values are also given over the temperature range 20–1400 °C. The effect of residual oxygen in the shield gas on emissivity is explored for the first time. The spectrophotometric technique was used to measure the metal thermo-optical properties.

Förderung

  • Engineering and Physical Sciences Research Council (EPSRC), UK

Zitieren

APA

Mullaney, K., & Tatam, R. P. (2025). Emissivity Measurements of Metals Used in Wire-Arc-Directed Energy Deposition Processes. Metals, 15(10), 1078. https://doi.org/10.3390/met15101078

Vancouver

Mullaney K, Tatam RP. Emissivity Measurements of Metals Used in Wire-Arc-Directed Energy Deposition Processes. Metals. 2025;15(10):1078. doi:10.3390/met15101078

BibTeX
@article{Mullaney2025,
  author = {Mullaney, Kevin and Tatam, Ralph P.},
  title = {Emissivity Measurements of Metals Used in Wire-Arc-Directed Energy Deposition Processes},
  journal = {Metals},
  year = {2025},
  volume = {15},
  number = {10},
  pages = {1078},
  doi = {10.3390/met15101078}
}
Kostenlos starten →