Effect of Piston Velocity on Microstructural Consistency and Critical Regions in a High-Pressure Die Cast AlSi9Cu3(Fe) Alloy Component
Metals · 23.09.2025 · 15 (10) · 1065
DOI: 10.3390/met15101065 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 23.09.2025. Verfasst von Dana Bolibruchová und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VEGA grant agency project, EU NextGenerationEU through the Recovery and Resilience Plan for Slovakia.
Abstract (Originalsprache)
High-pressure die casting (HPDC) is a highly efficient method for producing aluminum parts that require high dimensional accuracy and complex shapes. However, the quality of the resulting castings, specifically their porosity and microstructure, is critically dependent on the setting of process parameters. Any deficiencies in these aspects can lead to a significant reduction in the mechanical properties of the components. This article deals with the influence of plunger speed during high-pressure die casting on microstructure homogeneity and the occurrence of porosity in critical areas of AlSi9Cu3(Fe) alloy castings. Numerical simulations and experimental evaluation demonstrated that with increasing plunger speed, there is a transition from a transitional to a laminar flow regime to a fully turbulent regime, which affects the homogeneity of the alloy and its solidification. Turbulent flow minimizes shrinkage porosity in castings but increases the risk of gas porosity and oxide inclusions due to reoxidation processes, leading to the entrainment of air and oxide layers. Microporosity analysis showed that the lowest occurrence of shrinkage-type pores was found at a plunger speed of 4 m/s due to rapid filling and shorter solidification time. The optimal plunger speed range is between 3 and 3.6 m/s, ensuring a compromise between microstructure stability and minimization of porosity in critical areas.
Förderung
- VEGA grant agency project
- EU NextGenerationEU through the Recovery and Resilience Plan for Slovakia
Zitieren
APA
Bolibruchová, D., Matejka, M., Pastirčák, R., & Podprocká, R. (2025). Effect of Piston Velocity on Microstructural Consistency and Critical Regions in a High-Pressure Die Cast AlSi9Cu3(Fe) Alloy Component. Metals, 15(10), 1065. https://doi.org/10.3390/met15101065
Vancouver
Bolibruchová D, Matejka M, Pastirčák R, Podprocká R. Effect of Piston Velocity on Microstructural Consistency and Critical Regions in a High-Pressure Die Cast AlSi9Cu3(Fe) Alloy Component. Metals. 2025;15(10):1065. doi:10.3390/met15101065
BibTeX
@article{Bolibruchov2025,
author = {Bolibruchová, Dana and Matejka, Marek and Pastirčák, Richard and Podprocká, Radka},
title = {Effect of Piston Velocity on Microstructural Consistency and Critical Regions in a High-Pressure Die Cast AlSi9Cu3(Fe) Alloy Component},
journal = {Metals},
year = {2025},
volume = {15},
number = {10},
pages = {1065},
doi = {10.3390/met15101065}
}
EUVIMED