Constitutive Modeling of Creep–Fatigue Interaction in 1Cr-1Mo-0.25V Steel for Hold-Time Testing
Metals · 12.09.2025 · 15 (9) · 1014
DOI: 10.3390/met15091014 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 12.09.2025. Verfasst von Federico Bucciarelli und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In the field of energy production, creep–fatigue interaction is a typical failure mode that might compromise the structural integrity of both rotating equipment and pressure vessels. Common design practices approach the problem in a conservative way by using high safety factors, which typically results in additional costs for manufacturing companies. The aim of this article, in the framework of continuum damage mechanics approaches, is to present a novel fatigue damage-based constitutive law. The presented law is directly inspired by well-assessed creep-based rules, suggesting a similarity in the behavior. On the other hand, creep deformation and damage are calculated with a more recent approach. The identification of the model parameters was carried out by interpreting experimental results obtained from low-cycle fatigue and creep relaxation tests performed on a commonly used ferritic–martensitic steel for power generation rotor forgings. To validate the proposed models, they were used to estimate material life consumption when the material was subjected to fully reversed axial loading conditions with hold time under tensile load. Different loading conditions at different total strain ranges and hold times were simulated, and good agreement was found between the predicted and experimental life, thus confirming the validity of the proposed models.
Zitieren
APA
Bucciarelli, F., Guazzini, A., Grossi, T., Macoretta, G., & Monelli, B. D. (2025). Constitutive Modeling of Creep–Fatigue Interaction in 1Cr-1Mo-0.25V Steel for Hold-Time Testing. Metals, 15(9), 1014. https://doi.org/10.3390/met15091014
Vancouver
Bucciarelli F, Guazzini A, Grossi T, Macoretta G, Monelli BD. Constitutive Modeling of Creep–Fatigue Interaction in 1Cr-1Mo-0.25V Steel for Hold-Time Testing. Metals. 2025;15(9):1014. doi:10.3390/met15091014
BibTeX
@article{Bucciarelli2025,
author = {Bucciarelli, Federico and Guazzini, Alessandro and Grossi, Tommaso and Macoretta, Giuseppe and Monelli, Bernardo Disma},
title = {Constitutive Modeling of Creep–Fatigue Interaction in 1Cr-1Mo-0.25V Steel for Hold-Time Testing},
journal = {Metals},
year = {2025},
volume = {15},
number = {9},
pages = {1014},
doi = {10.3390/met15091014}
}
EUVIMED