Comparison of Fatigue Property Estimation Methods with Physical Test Data
Metals · 09.07.2025 · 15 (7) · 780
DOI: 10.3390/met15070780 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 09.07.2025. Verfasst von Sebastian Raczek und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Communication of the Polish Minister of Science and Higher Education.
Abstract (Originalsprache)
Cost reduction has always been a high priority target in modern management. Concentrating on material strength, the huge potential is recognized for cost reduction in finding the material fatigue coefficients by reduction the number and time required for testing specimens. The aim of this study is to evaluate the accuracy of several fatigue parameter estimation methods by comparing them with reference test data obtained for six different steel materials. In the literature, several estimation methods can be found. Those methods rely on tension or hardness tests. The concern is about the accuracy of those methods; therefore, a basic case was investigated involving estimation methods and comparing them to reference data from a physical test. The case was selected in a manner that allowed the verification of combined low and high cycle fatigue. As a result, the estimation methods produced a very wide range of fatigue life predictions, but some of them were quite accurate. This leads to the conclusion that estimation methods can be a step forward for finding the fatigue material properties; however, a study should be undertaken on which methods are the most suitable for the material family used.
Förderung
- Communication of the Polish Minister of Science and Higher Education
Zitieren
APA
Raczek, S., Niesłony, A., Kluger, K., & Łukasik, T. (2025). Comparison of Fatigue Property Estimation Methods with Physical Test Data. Metals, 15(7), 780. https://doi.org/10.3390/met15070780
Vancouver
Raczek S, Niesłony A, Kluger K, Łukasik T. Comparison of Fatigue Property Estimation Methods with Physical Test Data. Metals. 2025;15(7):780. doi:10.3390/met15070780
BibTeX
@article{Raczek2025,
author = {Raczek, Sebastian and Niesłony, Adam and Kluger, Krzysztof and Łukasik, Tomasz},
title = {Comparison of Fatigue Property Estimation Methods with Physical Test Data},
journal = {Metals},
year = {2025},
volume = {15},
number = {7},
pages = {780},
doi = {10.3390/met15070780}
}
EUVIMED