EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhanced Mechanical Performance of SLM-Printed Inconel 718 Lattice Structures Through Heat Treatments

María J. Briones-Montemayor, Rigoberto Guzmán-Nogales, Parisa Majari, Jorge A. Estrada-Díaz, Alex Elías-Zúñiga, Daniel Olvera-Trejo, Oscar Martínez-Romero, Imperio A. Perales-Martínez

Metals · 20.06.2025 · 15 (7) · 686

DOI: 10.3390/met15070686 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 20.06.2025. Verfasst von María J. Briones-Montemayor und 7 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tecnologico de Monterrey project entitled “Smart Lightweighting: Developing Biodegradable Polymers with Programmable Degradation for Advanced 3D Printing in En….

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Selective laser melting (SLM) allows the production of complex lattice structures with tunable mechanical properties. This study proposes an integrated approach to enhance the mechanical properties of Inconel 718 (IN718) lightweight structures by applying distinct heat treatment protocols and tailoring key printing parameters. Four lattice geometries—body-centered cube (BCC), diamond, inverse woodpile (IWP), and gyroid—were selected for evaluation. Three heat treatment protocols were applied to assess their effect on mechanical behavior. Additionally, the influence of key SLM parameters such as laser power, scan speed, hatch spacing, and layer thickness on structural performance was investigated. By combining process tailoring and post-processing strategies, this work demonstrates a method to improve the mechanical response of complex IN718 lattices. The results highlight significant improvements in yield strength and energy absorption for high-performance applications in aerospace and automotive engineering.

Förderung

  • Tecnologico de Monterrey project entitled “Smart Lightweighting: Developing Biodegradable Polymers with Programmable Degradation for Advanced 3D Printing in En…

Zitieren

APA

Briones-Montemayor, M. J., Guzmán-Nogales, R., Majari, P., Estrada-Díaz, J. A., Elías-Zúñiga, A., Olvera-Trejo, D., Martínez-Romero, O., & Perales-Martínez, I. A. (2025). Enhanced Mechanical Performance of SLM-Printed Inconel 718 Lattice Structures Through Heat Treatments. Metals, 15(7), 686. https://doi.org/10.3390/met15070686

Vancouver

Briones-Montemayor MJ, Guzmán-Nogales R, Majari P, Estrada-Díaz JA, Elías-Zúñiga A, Olvera-Trejo D, et al. Enhanced Mechanical Performance of SLM-Printed Inconel 718 Lattice Structures Through Heat Treatments. Metals. 2025;15(7):686. doi:10.3390/met15070686

BibTeX
@article{BrionesMontemayor2025,
  author = {Briones-Montemayor, María J. and Guzmán-Nogales, Rigoberto and Majari, Parisa and Estrada-Díaz, Jorge A. and Elías-Zúñiga, Alex and Olvera-Trejo, Daniel and Martínez-Romero, Oscar and Perales-Martínez, Imperio A.},
  title = {Enhanced Mechanical Performance of SLM-Printed Inconel 718 Lattice Structures Through Heat Treatments},
  journal = {Metals},
  year = {2025},
  volume = {15},
  number = {7},
  pages = {686},
  doi = {10.3390/met15070686}
}
Kostenlos starten →