Oxide Behavior During Laser Surface Melting
Metals · 31.05.2025 · 15 (6) · 627
DOI: 10.3390/met15060627 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 31.05.2025. Verfasst von Tomio Ohtsuki und 1 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Carnegie Mellon University.
Abstract (Originalsprache)
Parts fabricated by laser powder bed fusion (LPBF) contain oxide inclusions, which can be detrimental to fatigue resistance. Under typical LPBF conditions, the atmosphere contains enough oxygen to oxidize reactive elements such as aluminum and titanium, forming oxides in the parts. In this work, mechanisms of oxide formation and oxide alteration were studied by laser-remelting the surfaces of bulk specimens of IN718 and AlSi10Mg, without the addition of metal powder. Calculations based on the mass transfer of oxygen to the melt pool surface indicated that direct oxidation of the melt pool did not play a major role. Rather, both the oxidation of hot spatter and reworking of the pre-existing oxide affected the concentration and morphology of oxides on the metal surface.
Förderung
- Carnegie Mellon University
Zitieren
APA
Ohtsuki, T., & Pistorius, P. C. (2025). Oxide Behavior During Laser Surface Melting. Metals, 15(6), 627. https://doi.org/10.3390/met15060627
Vancouver
Ohtsuki T, Pistorius PC. Oxide Behavior During Laser Surface Melting. Metals. 2025;15(6):627. doi:10.3390/met15060627
BibTeX
@article{Ohtsuki2025,
author = {Ohtsuki, Tomio and Pistorius, Petrus Christiaan},
title = {Oxide Behavior During Laser Surface Melting},
journal = {Metals},
year = {2025},
volume = {15},
number = {6},
pages = {627},
doi = {10.3390/met15060627}
}
EUVIMED