EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advanced Porosity Control of CP780 Galvanized Steel During Gas Metal Arc Welding with Pulsed Arc

Carlos Adrián García Ochoa, Jorge Alejandro Verduzco Martínez, Francisco Fernando Curiel-López, Víctor Hugo López-Morelos, José Jaime Taha-Tijerina, Ariosto Medina Flores, Maleni García Gómez

Metals · 01.05.2025 · 15 (5) · 513

DOI: 10.3390/met15050513 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 01.05.2025. Verfasst von Carlos Adrián García Ochoa und 6 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the control of porosity during gas metal arc welding with pulsed arc (GMAW-P) of complex-phase 780 (CP780) galvanized steel. Due to the Zn coating on this type of steel, porosity forms during welding as a result of Zn vaporization. The objective was to optimize the welding parameters to minimize porosity with a design of experiments using an L9 orthogonal array to analyze the effects of peak current (Ip), pulse time (tp), and pulse frequency (f) in high-speed welding conditions. The results showed that porosity was significantly reduced with a peak current of 313 A, a frequency of 10 Hz, and a pulse time of 10 ms, achieving ~0% porosity in the validation welding trials. A microstructural analysis identified allotriomorphic ferrite, Widmanstätten ferrite, acicular ferrite, bainite, and martensite in the heat-affected zone (HAZ). A predictive model to anticipate the percentage of porosity with an R2 of 99.97% was developed, and an ANOVA determined the peak current as the most critical factor in porosity formation.

Zitieren

APA

Ochoa, C. A. G., Martínez, J. A. V., Curiel-López, F. F., López-Morelos, V. H., Taha-Tijerina, J. J., Flores, A. M., & Gómez, M. G. (2025). Advanced Porosity Control of CP780 Galvanized Steel During Gas Metal Arc Welding with Pulsed Arc. Metals, 15(5), 513. https://doi.org/10.3390/met15050513

Vancouver

Ochoa CAG, Martínez JAV, Curiel-López FF, López-Morelos VH, Taha-Tijerina JJ, Flores AM, et al. Advanced Porosity Control of CP780 Galvanized Steel During Gas Metal Arc Welding with Pulsed Arc. Metals. 2025;15(5):513. doi:10.3390/met15050513

BibTeX
@article{Ochoa2025,
  author = {Ochoa, Carlos Adrián García and Martínez, Jorge Alejandro Verduzco and Curiel-López, Francisco Fernando and López-Morelos, Víctor Hugo and Taha-Tijerina, José Jaime and Flores, Ariosto Medina and Gómez, Maleni García},
  title = {Advanced Porosity Control of CP780 Galvanized Steel During Gas Metal Arc Welding with Pulsed Arc},
  journal = {Metals},
  year = {2025},
  volume = {15},
  number = {5},
  pages = {513},
  doi = {10.3390/met15050513}
}
Kostenlos starten →