Fatigue Damage Assessment in AL6XN Stainless Steel Based on the Strain-Hardening Exponent n-Value
Metals · 22.04.2025 · 15 (5) · 472
DOI: 10.3390/met15050472 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 22.04.2025. Verfasst von Donovan Ramírez-Acevedo und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CONACHYT-Mexico.
Abstract (Originalsprache)
The fatigue life curve was determined for the AL6XN stainless steel under strain-controlled Low Cycle Fatigue (LCF) tests. Additionally, a specific number of loading cycles were applied to new specimens made from the same AL6XN alloy batch to set an Accumulated Fatigue Damage (AFD) based on the Palmgren–Miner rule. The AFD was 0.25, 0.50 and 0.75; subsequently, these specimens were subjected to tensile tests. It was observed that all AFD specimens exhibited a yield strength increment with respect to the AL6XN material property, thus, it was similar to a strain-hardening mechanism. However, the stress–strain behavior and microstructure characterization showed a microvoid nucleation and growth mechanism that competed against the strain-hardening one. The fracture in the 0.75 AFD specimens was dominated by this microvoid-based mechanism. The experimental results indicated that the strain-hardening exponent (n-value) and electrical resistivity (ρ-value) were consistently modified by the AFD in all the specimens, with an inverse linear relationship for the n-value and a nonlinear increasing behavior for the ρ-value.
Förderung
- CONACHYT-Mexico
Zitieren
APA
Ramírez-Acevedo, D., Ambriz, R. R., García, C. J., Gómora, C. M., & Jaramillo, D. (2025). Fatigue Damage Assessment in AL6XN Stainless Steel Based on the Strain-Hardening Exponent n-Value. Metals, 15(5), 472. https://doi.org/10.3390/met15050472
Vancouver
Ramírez-Acevedo D, Ambriz RR, García CJ, Gómora CM, Jaramillo D. Fatigue Damage Assessment in AL6XN Stainless Steel Based on the Strain-Hardening Exponent n-Value. Metals. 2025;15(5):472. doi:10.3390/met15050472
BibTeX
@article{RamrezAcevedo2025,
author = {Ramírez-Acevedo, Donovan and Ambriz, Ricardo Rafael and García, Christian Jesús and Gómora, Cesar Mendoza and Jaramillo, David},
title = {Fatigue Damage Assessment in AL6XN Stainless Steel Based on the Strain-Hardening Exponent n-Value},
journal = {Metals},
year = {2025},
volume = {15},
number = {5},
pages = {472},
doi = {10.3390/met15050472}
}
EUVIMED