Excessive Fe Contamination in Secondary Al Alloys: Microstructure, Porosity, and Corrosion Behaviour
Metals · 17.04.2025 · 15 (4) · 451
DOI: 10.3390/met15040451 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 17.04.2025. Verfasst von Helder Nunes und 4 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Portuguese Foundation for Science and Technology (FCT).
Abstract (Originalsprache)
The characterisation of aluminium casting alloys with iron concentrations exceeding current standards is essential, as upcycling has recently become a significant concern in achieving a more circular economy. Secondary aluminium casting alloys often exhibit insufficient mechanical properties for load-bearing automotive applications due to contamination with iron, mainly due to alloy mixing or remnants from end-of-life products during downcycling. This trend is anticipated to soon lead to a surplus of scrap. This study aims to fully understand the microstructural changes, intermetallic phase morphologies, and defect formation in AlSiMg alloy highly contaminated with Fe that exists in Al scraps and is detrimental for upcycling purposes. The investigation examined the AlSi7Mg0.3 alloy with Fe concentrations ranging from 0.1 to 3.8 wt.% Fe, employing thermodynamic simulations, hardness testing, quantitative image analysis, and corrosion tests. Among these alloys, the AlSi7Mg0.3-3.8Fe, containing the highest level of contamination, exhibited the most complex microstructure. This microstructure is characterised by the presence of two distinct Fe-rich intermetallic phases with diverse shapes and sizes: petal-like α′-Al8Fe2Si, long and thick β-Al4.5FeSi plaques, and very thin β-Al4.5FeSi needles. The significant growth in these phases with higher Fe concentration resulted in increases in hardness (15 HBW), porosity (1.39%), and corrosion rate (approximately 12 times).
Förderung
- Portuguese Foundation for Science and Technology (FCT)
Zitieren
APA
Nunes, H., Madureira, R., Vieira, M. F., Reis, A., & Emadinia, O. (2025). Excessive Fe Contamination in Secondary Al Alloys: Microstructure, Porosity, and Corrosion Behaviour. Metals, 15(4), 451. https://doi.org/10.3390/met15040451
Vancouver
Nunes H, Madureira R, Vieira MF, Reis A, Emadinia O. Excessive Fe Contamination in Secondary Al Alloys: Microstructure, Porosity, and Corrosion Behaviour. Metals. 2025;15(4):451. doi:10.3390/met15040451
BibTeX
@article{Nunes2025,
author = {Nunes, Helder and Madureira, Rui and Vieira, Manuel F. and Reis, Ana and Emadinia, Omid},
title = {Excessive Fe Contamination in Secondary Al Alloys: Microstructure, Porosity, and Corrosion Behaviour},
journal = {Metals},
year = {2025},
volume = {15},
number = {4},
pages = {451},
doi = {10.3390/met15040451}
}
EUVIMED