EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimized and Additively Manufactured Face Mills for Enhanced Cutting Performance

Ozgur Poyraz, Daniel Tomlinson, Anthony Molyneux, Marie E. Baxter, Evren Yasa, James Hughes

Metals · 28.03.2025 · 15 (4) · 376

DOI: 10.3390/met15040376 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 28.03.2025. Verfasst von Ozgur Poyraz und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: AMRC Membership Funding.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the growing acceptance of additive manufacturing (AM) across various sectors, laser-based powder bed fusion (PBF-LB) has widely been utilized to create intricately shaped parts from a range of metals alloys. The factors contributing to this reception are limited not only to the achievable geometrical complexity but also enhanced product functionality. Prominent sectors such as aerospace, defense, and biomedical have begun to leverage PBF-LB for a wide range of applications; its use in other industries, such as cutting tool manufacturing, remains more limited. Therefore, to address the potential of LPBF for higher performance in cutting tool applications, this study examines topology optimization and the laser powder bed fusion of face mills with experimental modal characteristics and cutting performance. The objectives in topology optimizations were to decrease the vibration magnitudes of face mills while keeping them stiff against deformation due to cutting forces. Three distinct designs were benchmarked, each with different weight reduction targets, and were fabricated using PBF-LB with M300 maraging steel. The optimized face mills demonstrated better performance with diminished vibration magnitudes and less tool wear patterns.

Förderung

  • AMRC Membership Funding

Zitieren

APA

Poyraz, O., Tomlinson, D., Molyneux, A., Baxter, M. E., Yasa, E., & Hughes, J. (2025). Optimized and Additively Manufactured Face Mills for Enhanced Cutting Performance. Metals, 15(4), 376. https://doi.org/10.3390/met15040376

Vancouver

Poyraz O, Tomlinson D, Molyneux A, Baxter ME, Yasa E, Hughes J. Optimized and Additively Manufactured Face Mills for Enhanced Cutting Performance. Metals. 2025;15(4):376. doi:10.3390/met15040376

BibTeX
@article{Poyraz2025,
  author = {Poyraz, Ozgur and Tomlinson, Daniel and Molyneux, Anthony and Baxter, Marie E. and Yasa, Evren and Hughes, James},
  title = {Optimized and Additively Manufactured Face Mills for Enhanced Cutting Performance},
  journal = {Metals},
  year = {2025},
  volume = {15},
  number = {4},
  pages = {376},
  doi = {10.3390/met15040376}
}
Kostenlos starten →