Mechanical and Corrosion Properties of AA2024 Aluminum Alloy with Multimodal Gradient Structures
Metals · 10.02.2025 · 15 (2) · 177
DOI: 10.3390/met15020177 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 10.02.2025. Verfasst von Zhenwei Xie und 8 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yunnan International Cooperation Base in Cloud Computation for Nonferrous Metal Processing, the Key Science and Technology Project of Yunnan Province, Kunming University of Science and Technology Analytical Testing of China.
Abstract (Originalsprache)
Enhancing the strength and toughness of aluminum alloys using microstructure optimization remains a key challenge. In this study, an AA2024 aluminum alloy with a double-layer multi-gradient structure was fabricated using 50% constrained deformation and single-stage peak aging at 150 °C. Microstructural and compositional analysis was performed using SEM, XRD, and TEM to investigate grain structures, dislocation density, and the distribution of precipitated phases. The results revealed a heterogeneous microstructure with variations in grain size, dislocation gradient, and precipitation phases between the constrained and deformation layers. Mechanical testing demonstrated a 30.9% increase in yield strength, a 16.4% increase in tensile strength, and a 13.9% improvement in uniform elongation compared to the T6 temper. Corrosion tests showed enhanced resistance, with a shallower intergranular corrosion depth and higher self-corrosion potential. The improved mechanical properties were attributed to the dislocation gradient and heterogeneous precipitation phases, while the enhanced corrosion resistance resulted from the transformation of the S phase from a continuous grain boundary distribution to a discontinuous distribution along dislocations. This study provides a novel approach for optimizing the mechanical and corrosion properties of AA2024 aluminum alloy using microstructure design and precise thermal–mechanical treatment.
Förderung
- Yunnan International Cooperation Base in Cloud Computation for Nonferrous Metal Processing
- the Key Science and Technology Project of Yunnan Province
- Kunming University of Science and Technology Analytical Testing of China
Zitieren
APA
Xie, Z., Zhou, L., Li, J., Duan, Y., Peng, M., Xiao, H., Du, X., Zhao, Y., & Li, M. (2025). Mechanical and Corrosion Properties of AA2024 Aluminum Alloy with Multimodal Gradient Structures. Metals, 15(2), 177. https://doi.org/10.3390/met15020177
Vancouver
Xie Z, Zhou L, Li J, Duan Y, Peng M, Xiao H, et al. Mechanical and Corrosion Properties of AA2024 Aluminum Alloy with Multimodal Gradient Structures. Metals. 2025;15(2):177. doi:10.3390/met15020177
BibTeX
@article{Xie2025,
author = {Xie, Zhenwei and Zhou, Liexing and Li, Jun and Duan, Yonghua and Peng, Mingjun and Xiao, Hongbo and Du, Xiong and Zhao, Yuanjie and Li, Mengnie},
title = {Mechanical and Corrosion Properties of AA2024 Aluminum Alloy with Multimodal Gradient Structures},
journal = {Metals},
year = {2025},
volume = {15},
number = {2},
pages = {177},
doi = {10.3390/met15020177}
}
EUVIMED