EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Machinability and Energy Consumption of CK45 Steel Using Synthetic-Based Nanofluid and Minimum Quantity Lubrication Cutting Fluid

Emine Şap, Üsame Ali Usca, Ünal Değirmenci, Serhat Şap, Mahir Uzun

Metals · 03.01.2025 · 15 (1) · 36

DOI: 10.3390/met15010036 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 03.01.2025. Verfasst von Emine Şap und 4 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

CK45 steel has various industrial uses due to its durability, wear resistance and strength. It is generally used in machinery, automotive industry, hydraulic cylinders, bearings, gears and similar applications. It is important to investigate the machinability properties of CK45 steel, which is frequently used in the manufacturing industry, in different cooling/lubrication environments. This study focused on the effects of a synthetic-based nanofluid cooling strategy and different cutting parameters during the milling of CK45 steel. Additionally, Taguchi analysis was performed to reduce the number of experiments and costs. Sustainable cooling/lubrication techniques were used during milling. A three-axis computer-controlled machine was used for the milling process. According to the findings, flank wear, surface roughness, and energy consumption were reduced by machining in the nanofluid environment. It was observed that Cu nanoparticles added into the nanofluid increased the machinability properties. Furthermore, statistical analysis was employed to ascertain the predominant control variables influencing the response parameters. Machinability efficiency can be increased by using nanoparticulate fluids as a coolant during milling. In addition, costs can be reduced by identifying the most effective factors in the experiment through statistical analysis.

Zitieren

APA

Şap, E., Usca, Ü. A., Değirmenci, Ü., Şap, S., & Uzun, M. (2025). Evaluation of Machinability and Energy Consumption of CK45 Steel Using Synthetic-Based Nanofluid and Minimum Quantity Lubrication Cutting Fluid. Metals, 15(1), 36. https://doi.org/10.3390/met15010036

Vancouver

Şap E, Usca ÜA, Değirmenci Ü, Şap S, Uzun M. Evaluation of Machinability and Energy Consumption of CK45 Steel Using Synthetic-Based Nanofluid and Minimum Quantity Lubrication Cutting Fluid. Metals. 2025;15(1):36. doi:10.3390/met15010036

BibTeX
@article{ap2025,
  author = {Şap, Emine and Usca, Üsame Ali and Değirmenci, Ünal and Şap, Serhat and Uzun, Mahir},
  title = {Evaluation of Machinability and Energy Consumption of CK45 Steel Using Synthetic-Based Nanofluid and Minimum Quantity Lubrication Cutting Fluid},
  journal = {Metals},
  year = {2025},
  volume = {15},
  number = {1},
  pages = {36},
  doi = {10.3390/met15010036}
}
Kostenlos starten →