EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Analysis of the Corrosion and Mechanical Behavior of an Al-SiC Composite and AA 2024 Alloy Fabricated by Powder Metallurgy for Aeronautical Applications

Willian Aperador, Jonnathan Aperador, Giovany Orozco-Hernández

Metals · 20.12.2024 · 14 (12) · 1462

DOI: 10.3390/met14121462 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 20.12.2024. Verfasst von Willian Aperador und 2 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad ECCI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a comparative analysis of the corrosion and mechanical properties of an Al-SiC composite and an AA 2024 aluminum alloy, focusing on their suitability for aeronautical applications. The Al-SiC composite was fabricated using advanced powder metallurgy techniques, incorporating a 20% volume of silicon carbide (SiC) particles, averaging 1.6 µm in size, to enhance its structural and electrochemical performance. Electrochemical evaluations in an aerated 3.5% NaCl solution revealed a significant improvement in the corrosion resistance of the Al-SiC composite. This enhancement is attributed to the cathodic nature of the SiC particles, which promote the formation of a protective aluminum oxide layer, reducing pitting corrosion and preserving the material’s structural integrity. In terms of the mechanical properties, the Al-SiC composite demonstrated a higher yield strength and ultimate tensile strength compared to the AA 2024 alloy. While it exhibited a slightly lower elongation at failure, the composite maintained a favorable balance between strength and ductility. Additionally, the composite showed a higher Young’s modulus indicating improved resistance to deformation under load. These findings underscore the potential of the Al-SiC composite for demanding aerospace applications, offering valuable insights into the development of materials capable of withstanding extreme operational environments.

Förderung

  • Universidad ECCI

Zitieren

APA

Aperador, W., Aperador, J., & Orozco-Hernández, G. (2024). Comparative Analysis of the Corrosion and Mechanical Behavior of an Al-SiC Composite and AA 2024 Alloy Fabricated by Powder Metallurgy for Aeronautical Applications. Metals, 14(12), 1462. https://doi.org/10.3390/met14121462

Vancouver

Aperador W, Aperador J, Orozco-Hernández G. Comparative Analysis of the Corrosion and Mechanical Behavior of an Al-SiC Composite and AA 2024 Alloy Fabricated by Powder Metallurgy for Aeronautical Applications. Metals. 2024;14(12):1462. doi:10.3390/met14121462

BibTeX
@article{Aperador2024,
  author = {Aperador, Willian and Aperador, Jonnathan and Orozco-Hernández, Giovany},
  title = {Comparative Analysis of the Corrosion and Mechanical Behavior of an Al-SiC Composite and AA 2024 Alloy Fabricated by Powder Metallurgy for Aeronautical Applications},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {12},
  pages = {1462},
  doi = {10.3390/met14121462}
}
Kostenlos starten →