EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Crystallographic Texture Evolution of Aluminum Samples with a Rectangular Cross-Section During Equal Channel Angular Pressing Processing

Andrea Mireles-Ramos, Francisco García-Pastor

Metals · 20.12.2024 · 14 (12) · 1460

DOI: 10.3390/met14121460 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 20.12.2024. Verfasst von Andrea Mireles-Ramos und 1 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Rassini Suspensiones S.A. de C.V., CONAHCYT.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The evolution of the crystallographic texture after severe plastic deformation (SPD) of the aluminum alloy AA7075, commonly used in the aeronautical and automotive industries, depends on the parameters of the applied deformation process. In this paper, a combination between experimental ECAP processing and numerical simulation using the visco-plastic self-consistent methodology (VPSC) was carried out. The limitations in the homogeneity of the mechanical properties and texture of the parts processed via ECAP can be improved by an adequate choice of the processing route. According to the literature, the most effective route to increase the properties of this material is the Bc route. However, due to the two-fold symmetry along the extrusion axis, the Bc route cannot be used in the components under study. Because of this, it was decided to study C and modified C routes. The simulation results showed the characteristic fibers of the ECAP process measured through X-ray diffraction. The texture analysis shows that the most effective route to obtain a more homogenous shear deformation and therefore reduce the grain size is the Bc route, followed by the modified C route and finally the C route.

Förderung

  • Rassini Suspensiones S.A. de C.V.
  • CONAHCYT

Zitieren

APA

Mireles-Ramos, A., & García-Pastor, F. (2024). Crystallographic Texture Evolution of Aluminum Samples with a Rectangular Cross-Section During Equal Channel Angular Pressing Processing. Metals, 14(12), 1460. https://doi.org/10.3390/met14121460

Vancouver

Mireles-Ramos A, García-Pastor F. Crystallographic Texture Evolution of Aluminum Samples with a Rectangular Cross-Section During Equal Channel Angular Pressing Processing. Metals. 2024;14(12):1460. doi:10.3390/met14121460

BibTeX
@article{MirelesRamos2024,
  author = {Mireles-Ramos, Andrea and García-Pastor, Francisco},
  title = {Crystallographic Texture Evolution of Aluminum Samples with a Rectangular Cross-Section During Equal Channel Angular Pressing Processing},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {12},
  pages = {1460},
  doi = {10.3390/met14121460}
}
Kostenlos starten →