Numerical Simulation of Gas Atomization and Powder Flowability for Metallic Additive Manufacturing
Metals · 02.10.2024 · 14 (10) · 1124
DOI: 10.3390/met14101124 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 02.10.2024. Verfasst von Yonglong Du und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shanghai Electric Group Co., Ltd. Central Academe’s project.
Abstract (Originalsprache)
The quality of metal powder is essential in additive manufacturing (AM). The defects and mechanical properties of alloy parts manufactured through AM are significantly influenced by the particle size, sphericity, and flowability of the metal powder. Gas atomization (GA) technology is a widely used method for producing metal powders due to its high efficiency and cost-effectiveness. In this work, a multi-phase numerical model is developed to compute the alloy liquid breaking in the GA process by capturing the gas–liquid interface using the Coupled Level Set and Volume-of-Fluid (CLSVOF) method and the realizable k-ε turbulence model. A GA experiment is carried out, and a statistical comparison between the particle-size distributions obtained from the simulation and GA experiment shows that the relative errors of the cumulative frequency for the particle sizes sampled in two regions of the GA chamber are 5.28% and 5.39%, respectively. The mechanism of powder formation is discussed based on the numerical results. In addition, a discrete element model (DEM) is developed to compute the powder flowability by simulating a Hall flow experiment using the particle-size distribution obtained from the GA experiment. The relative error of the time that finishes the Hall flow in the simulation and experiment is obtained to be 1.9%.
Förderung
- Shanghai Electric Group Co., Ltd. Central Academe’s project
Zitieren
APA
Du, Y., Liu, X., Xu, S., Fan, E., Zhao, L., Chen, C., & Ren, Z. (2024). Numerical Simulation of Gas Atomization and Powder Flowability for Metallic Additive Manufacturing. Metals, 14(10), 1124. https://doi.org/10.3390/met14101124
Vancouver
Du Y, Liu X, Xu S, Fan E, Zhao L, Chen C, et al. Numerical Simulation of Gas Atomization and Powder Flowability for Metallic Additive Manufacturing. Metals. 2024;14(10):1124. doi:10.3390/met14101124
BibTeX
@article{Du2024,
author = {Du, Yonglong and Liu, Xin and Xu, Songzhe and Fan, Enxiang and Zhao, Lixiao and Chen, Chaoyue and Ren, Zhongming},
title = {Numerical Simulation of Gas Atomization and Powder Flowability for Metallic Additive Manufacturing},
journal = {Metals},
year = {2024},
volume = {14},
number = {10},
pages = {1124},
doi = {10.3390/met14101124}
}
EUVIMED