EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure Evolution and Tensile Properties of Medium Manganese Steel Heat Treated by Two-Step Annealing

Tao Kang, Zhanyu Zhan, Changcheng Wang, Zhengzhi Zhao, Juhua Liang, Lele Yao

Metals · 03.09.2024 · 14 (9) · 1008

DOI: 10.3390/met14091008 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 03.09.2024. Verfasst von Tao Kang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: key research and development plan of Shandong Province, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, the nucleation and growth of austenite are controlled through a two-step annealing process to achieve multi-scale distribution and content increase of retained austenite in low manganese series medium-Mn steel. Combining SEM, EBSD, AES, and other experimental equipment, the evolution rules of the microstructure, properties, and element distribution behavior of the test steel during the annealing process are studied. Compared with one-step annealing, the two-step annealing significantly broadens the size distribution range of retained austenite. In the first step, after annealing at a higher intercritical temperature (760 °C), the ferrite and the M/A island are obtained, completing the initial partition of Mn and the refinement of microstructures. During the second step of annealing (720 °C), the primary Mn-rich martensite region provides higher nucleation driving force and finer dispersed nucleation sites, promoting the nucleation and growth of reverse transformation austenite. At the same time, the metastable-retained austenite formed after the first step of annealing continues to grow through interface movement. Furthermore, a high proportion (23.4%) of retained austenite with multi-scale distribution is formed in the final microstructure, and the product of strength and elongation increased from 21.8 GPa·% by the one-step annealing process to 30.1 GPa·%.

Förderung

  • key research and development plan of Shandong Province
  • National Natural Science Foundation of China

Zitieren

APA

Kang, T., Zhan, Z., Wang, C., Zhao, Z., Liang, J., & Yao, L. (2024). Microstructure Evolution and Tensile Properties of Medium Manganese Steel Heat Treated by Two-Step Annealing. Metals, 14(9), 1008. https://doi.org/10.3390/met14091008

Vancouver

Kang T, Zhan Z, Wang C, Zhao Z, Liang J, Yao L. Microstructure Evolution and Tensile Properties of Medium Manganese Steel Heat Treated by Two-Step Annealing. Metals. 2024;14(9):1008. doi:10.3390/met14091008

BibTeX
@article{Kang2024,
  author = {Kang, Tao and Zhan, Zhanyu and Wang, Changcheng and Zhao, Zhengzhi and Liang, Juhua and Yao, Lele},
  title = {Microstructure Evolution and Tensile Properties of Medium Manganese Steel Heat Treated by Two-Step Annealing},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {9},
  pages = {1008},
  doi = {10.3390/met14091008}
}
Kostenlos starten →