EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Studies on the Anisotropic Fatigue Behaviour of IN718 Fabricated via Wire Arc Additive Manufacturing

Guiyi Wu, Maohong Yang, Zhaohui Yu, Shuyan Zhang, Hongbo Liu, Jun Xiong

Metals · 28.06.2024 · 14 (7) · 770

DOI: 10.3390/met14070770 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 28.06.2024. Verfasst von Guiyi Wu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Major Project of Basic and Applied Basic Research, Guangdong Basic and Applied Basic Research Foundation, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wire and arc additive manufacturing (WAAM) offers promise in creating large complex structures due to its flexibility and high material deposition rates. The nickel-based alloy IN718 is favoured for WAAM due to its weldability and compatibility. However, WAAM can introduce issues like anisotropic grain structure, porosity, and residual stresses which can lead to directional variations in tensile, fatigue, and fracture behaviour. This paper studied the WAAM process of IN718, utilising cold metal transfer (CMT). The optimised CMT-WAAM parameters for IN718 were identified to as a wire feed speed of 8–10 m/min and a torch travel speed of 0.5–0.7 m/min, resulting in stable deposition and minimal defects. Nevertheless, columnar grain structures were observed in the build direction (BD), with coarse grains in the wall-length direction (WD). This anisotropic microstructure coupled with stress concentrators, contributes to the directional dependence observed in tensile properties, fatigue endurance, and crack growth. The investigation revealed superior ductility in the BD compared to the WD. Interestingly, the fatigue endurance testing showed a longer life in the WD compared with the BD, attributed to stronger stress concentrators in the BD specimens. However, when examining a cracked specimen, the fatigue crack propagated faster in the WD rather than the BD.

Förderung

  • Guangdong Major Project of Basic and Applied Basic Research
  • Guangdong Basic and Applied Basic Research Foundation
  • National Natural Science Foundation of China

Zitieren

APA

Wu, G., Yang, M., Yu, Z., Zhang, S., Liu, H., & Xiong, J. (2024). Experimental Studies on the Anisotropic Fatigue Behaviour of IN718 Fabricated via Wire Arc Additive Manufacturing. Metals, 14(7), 770. https://doi.org/10.3390/met14070770

Vancouver

Wu G, Yang M, Yu Z, Zhang S, Liu H, Xiong J. Experimental Studies on the Anisotropic Fatigue Behaviour of IN718 Fabricated via Wire Arc Additive Manufacturing. Metals. 2024;14(7):770. doi:10.3390/met14070770

BibTeX
@article{Wu2024,
  author = {Wu, Guiyi and Yang, Maohong and Yu, Zhaohui and Zhang, Shuyan and Liu, Hongbo and Xiong, Jun},
  title = {Experimental Studies on the Anisotropic Fatigue Behaviour of IN718 Fabricated via Wire Arc Additive Manufacturing},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {7},
  pages = {770},
  doi = {10.3390/met14070770}
}
Kostenlos starten →