Optimization of Clinching Joint Process with Preforming between Ultra-High-Strength Steel and Aluminum Alloy Sheets
Metals · 28.06.2024 · 14 (7) · 767
DOI: 10.3390/met14070767 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 28.06.2024. Verfasst von Lun Fu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Project of the Central Government Guiding Local Science and Technology Development, Postgraduate Innovation Funding Project of Hebei Province.
Abstract (Originalsprache)
With the rapid development of lightweight automobiles, the clinching joint technology of ultra-high-strength steel with aluminum alloy sheets have been paid more and more attention. However, due to significant differences in plastic deformation capabilities between the two metals, particularly the difficulty of steel sheet deformation, conventional clinching processes often result in insufficient joint interlocking or fracture issues. Although the preliminary use of clinching processes with preforming methods has shown some effectiveness in connecting two types of sheets, the bond strength is not high. This study employs finite element simulation and orthogonal optimization methods to investigate the impact of relevant process parameters on joint morphology in clinching processes with preforming. Under the condition of optimizing process parameters, a clinching punch with an added pressure-step structure was proposed to compact the joint and further enhance joint quality. Experimental verification demonstrates the feasibility of the improved clinching processes with preforming for bonding ultra-high-strength steel and aluminum alloy sheets.
Förderung
- Project of the Central Government Guiding Local Science and Technology Development
- Postgraduate Innovation Funding Project of Hebei Province
Zitieren
APA
Fu, L., Zhang, S., Qiu, P., Xiao, H., Deng, B., & Lu, X. (2024). Optimization of Clinching Joint Process with Preforming between Ultra-High-Strength Steel and Aluminum Alloy Sheets. Metals, 14(7), 767. https://doi.org/10.3390/met14070767
Vancouver
Fu L, Zhang S, Qiu P, Xiao H, Deng B, Lu X. Optimization of Clinching Joint Process with Preforming between Ultra-High-Strength Steel and Aluminum Alloy Sheets. Metals. 2024;14(7):767. doi:10.3390/met14070767
BibTeX
@article{Fu2024,
author = {Fu, Lun and Zhang, Shanyin and Qiu, Ping and Xiao, Hong and Deng, Boran and Lu, Xiaoxin},
title = {Optimization of Clinching Joint Process with Preforming between Ultra-High-Strength Steel and Aluminum Alloy Sheets},
journal = {Metals},
year = {2024},
volume = {14},
number = {7},
pages = {767},
doi = {10.3390/met14070767}
}
EUVIMED