EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparison of Nitriding Behavior for Austenitic Stainless Steel 316Ti and Super Austenitic Stainless Steel 904L

Stephan Mändl, Darina Manova

Metals · 01.06.2024 · 14 (6) · 659

DOI: 10.3390/met14060659 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 01.06.2024. Verfasst von Stephan Mändl und 1 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft DFG.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In situ X-ray diffraction (XRD) was used to compare nitrogen low-energy ion implantation (LEII) into austenitic stainless steel 316Ti and super austenitic stainless steel 904L. While the diffusion and layer growth were very similar, as derived from the decreasing intensity of the substrate reflection, strong variations in the observed lattice expansion—as a function of orientation, the steel alloy, and nitriding temperature—were observed. Nevertheless, a similar resulting nitrogen content was measured using time-of-flight secondary ion mass spectrometry (ToF-SIMS). Furthermore, for some conditions, the formation of a double layer with two distinct lattice expansions was observed, especially for steel 904L. Regarding the stability of expanded austenite, 316Ti had already decayed in CrN during nitriding at 500 °C, while no such effect was observed for 904L. Thus, the alloy composition has a strong influence only on the lattice expansion and the stability of expanded austenite—but not the diffusion and nitrogen content.

Förderung

  • Deutsche Forschungsgemeinschaft DFG

Zitieren

APA

Mändl, S., & Manova, D. (2024). Comparison of Nitriding Behavior for Austenitic Stainless Steel 316Ti and Super Austenitic Stainless Steel 904L. Metals, 14(6), 659. https://doi.org/10.3390/met14060659

Vancouver

Mändl S, Manova D. Comparison of Nitriding Behavior for Austenitic Stainless Steel 316Ti and Super Austenitic Stainless Steel 904L. Metals. 2024;14(6):659. doi:10.3390/met14060659

BibTeX
@article{Mndl2024,
  author = {Mändl, Stephan and Manova, Darina},
  title = {Comparison of Nitriding Behavior for Austenitic Stainless Steel 316Ti and Super Austenitic Stainless Steel 904L},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {6},
  pages = {659},
  doi = {10.3390/met14060659}
}
Kostenlos starten →