Modelling and Prediction of Process Parameters with Low Energy Consumption in Wire Arc Additive Manufacturing Based on Machine Learning
Metals · 11.05.2024 · 14 (5) · 567
DOI: 10.3390/met14050567 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 11.05.2024. Verfasst von Haitao Zhang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hunan Province, Education Department of Hunan Province.
Abstract (Originalsprache)
Wire arc additive manufacturing (WAAM) has attracted increasing interest in industry and academia due to its capability to produce large and complex metallic components at a high deposition rate. One of the basic tasks in WAAM is to determine appropriate process parameters, which will directly affect the morphology and quality of the weld bead. However, the selection of process parameters relies heavily on empirical data from trial-and-error experiments, which results in significant time and cost expenditures. This paper employed different machine learning models, including SVR, BPNN, and XGBoost, to predict process parameters for WAAM. Furthermore, the SVR model was optimized by the Genetic Algorithm (GA) and Particle Swarm Optimization (PSO) algorithms. A 3D laser scanner was employed to obtain the weld bead’s point cloud, and the weld bead size was extracted using the point cloud processing algorithm as the training data. The K-fold cross-validation strategy was applied to train and validate machine learning models. The comparison results showed that PSO–SVR predicted process parameters with the highest precision, with the RMSE, R2, and MAE being 1.1670, 0.9879, and 0.8310, respectively. Based on the process parameters produced by PSO–SVR, an optimal process parameter combination was chosen by taking into comprehensive consideration the impacts of power consumption and efficiency. The effectiveness of the process parameter optimization method was proved through three groups of validation experiments, with the energy consumption of the first two groups decreasing by 10.68% and 11.47%, respectively.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Hunan Province
- Education Department of Hunan Province
Zitieren
APA
Zhang, H., Bai, X., Dong, H., & Zhang, H. (2024). Modelling and Prediction of Process Parameters with Low Energy Consumption in Wire Arc Additive Manufacturing Based on Machine Learning. Metals, 14(5), 567. https://doi.org/10.3390/met14050567
Vancouver
Zhang H, Bai X, Dong H, Zhang H. Modelling and Prediction of Process Parameters with Low Energy Consumption in Wire Arc Additive Manufacturing Based on Machine Learning. Metals. 2024;14(5):567. doi:10.3390/met14050567
BibTeX
@article{Zhang2024,
author = {Zhang, Haitao and Bai, Xingwang and Dong, Honghui and Zhang, Haiou},
title = {Modelling and Prediction of Process Parameters with Low Energy Consumption in Wire Arc Additive Manufacturing Based on Machine Learning},
journal = {Metals},
year = {2024},
volume = {14},
number = {5},
pages = {567},
doi = {10.3390/met14050567}
}
EUVIMED