EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effects of Si Substitution with C on the Amorphous Forming Ability, Thermal Stability, and Magnetic Properties of an FeSiBPC Amorphous Alloy

Wenzhong Zhu, Xiaoqian Jiang, Chen Chen, Shaojie Wu, Yongfu Cai, Fushan Li, Ran Wei, Tan Wang

Metals · 04.05.2024 · 14 (5) · 546

DOI: 10.3390/met14050546 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 04.05.2024. Verfasst von Wenzhong Zhu und 7 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key Scientific Research Project of Colleges and Universities in Henan Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The industrialization of Fe-based amorphous alloys with high a saturation magnetic flux density (Bs) has been limited so far due to their inadequate amorphous forming ability (AFA). In this study, the effects of substituting Si with C on the AFA, thermal stability, and magnetic properties of Fe82Si6−xB9P3Cx (x = 0–6) alloys were systematically investigated. The experimental results demonstrate that the AFA, thermal stability, and soft magnetic properties can be significantly enhanced by the addition of C. Specifically, at a copper wheel velocity of 40 m/s, the Fe82Si6−xB9P3Cx (x = 2, 3, 4, 5 and 6) alloy ribbons exhibit a fully amorphous structure in the as-spun state. The activation energy required for the α-Fe phase crystallization process in Fe82Si6−xB9P3Cx (x = 0, 2, 4, and 6) alloys is determined to be 326.74, 390.69, 441.06, and 183.87 kJ/mol, respectively. Among all of the compositions studied, the Fe82Si4B9P3C2 alloy exhibits optimized soft magnetic properties, including a low coercivity (Hc) of 1.7 A/m, a high effective permeability (μe) of 10608 (f = 1 kHz), and a relatively high Bs of 1.61 T. These improvements may be attributed to a more homogeneous and optimized magnetic domain structure being achieved through proper C addition. This work holds significant implications for the advancement of Fe-based soft magnetic amorphous alloys with high Bs.

Förderung

  • National Natural Science Foundation of China
  • Key Scientific Research Project of Colleges and Universities in Henan Province

Zitieren

APA

Zhu, W., Jiang, X., Chen, C., Wu, S., Cai, Y., Li, F., Wei, R., & Wang, T. (2024). The Effects of Si Substitution with C on the Amorphous Forming Ability, Thermal Stability, and Magnetic Properties of an FeSiBPC Amorphous Alloy. Metals, 14(5), 546. https://doi.org/10.3390/met14050546

Vancouver

Zhu W, Jiang X, Chen C, Wu S, Cai Y, Li F, et al. The Effects of Si Substitution with C on the Amorphous Forming Ability, Thermal Stability, and Magnetic Properties of an FeSiBPC Amorphous Alloy. Metals. 2024;14(5):546. doi:10.3390/met14050546

BibTeX
@article{Zhu2024,
  author = {Zhu, Wenzhong and Jiang, Xiaoqian and Chen, Chen and Wu, Shaojie and Cai, Yongfu and Li, Fushan and Wei, Ran and Wang, Tan},
  title = {The Effects of Si Substitution with C on the Amorphous Forming Ability, Thermal Stability, and Magnetic Properties of an FeSiBPC Amorphous Alloy},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {5},
  pages = {546},
  doi = {10.3390/met14050546}
}
Kostenlos starten →