Revealing the Enhancement Mechanism of Laser Cutting on the Strength–Ductility Combination in Low Carbon Steel
Metals · 02.05.2024 · 14 (5) · 541
DOI: 10.3390/met14050541 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 02.05.2024. Verfasst von Jie Chen und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhejiang Provincial Natural Science Foundation of China under Grant, Wenzhou Science and Technology Project.
Abstract (Originalsprache)
The strength–ductility mechanism of the low-carbon steels processed by laser cutting is investigated in this paper. A typical gradient-phased structure can be obtained near the laser cutting surface, which consists of a laser-remelted layer (LRL, with the microstructure of lath bainite + granular bainite) and heat-affected zone (HAZ). As the distance from the laser cutting surface increases, the content of lath martensite decreases in the HAZ, which is accompanied by a rise in the content of ferrite. Considering that the microstructures of the LRL and HAZ are completely different from the base metal (BM, ferrite + pearlite), a significant strain gradient can be inevitably generated by the remarkable microhardness differences in the gradient-phased structure. The hetero-deformation-induced strengthening and hardening will be produced, which is related to the pileups of the geometrically necessary dislocations (GNDs) that are generated to accommodate the strain gradient near interfaces. Plural phases of the HAZ can also contribute to the increment of the hetero-deformation-induced strengthening and hardening during deformation. Due to the gradient-phased structure, the low carbon steels under the process of laser cutting have a superior combination of strength and ductility as yield strength of ~487 MPa, tensile strength of ~655 MPa, and total elongation of ~32.7%.
Förderung
- Zhejiang Provincial Natural Science Foundation of China under Grant
- Wenzhou Science and Technology Project
Zitieren
APA
Chen, J., Tu, F., Wang, P., & Cao, Y. (2024). Revealing the Enhancement Mechanism of Laser Cutting on the Strength–Ductility Combination in Low Carbon Steel. Metals, 14(5), 541. https://doi.org/10.3390/met14050541
Vancouver
Chen J, Tu F, Wang P, Cao Y. Revealing the Enhancement Mechanism of Laser Cutting on the Strength–Ductility Combination in Low Carbon Steel. Metals. 2024;14(5):541. doi:10.3390/met14050541
BibTeX
@article{Chen2024,
author = {Chen, Jie and Tu, Feiyue and Wang, Pengfei and Cao, Yu},
title = {Revealing the Enhancement Mechanism of Laser Cutting on the Strength–Ductility Combination in Low Carbon Steel},
journal = {Metals},
year = {2024},
volume = {14},
number = {5},
pages = {541},
doi = {10.3390/met14050541}
}
EUVIMED