EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of TiB2 Addition on the Microstructure and Mechanical Properties of Laser-Directed Energy Deposition TiAl Alloy

Yancheng Yang, Yi Hu, Hongyan Chen, Yu Li, Jiawei Wang, Xu Cheng, Haibo Tang, Xianzhe Ran, Dong Liu

Metals · 30.04.2024 · 14 (5) · 533

DOI: 10.3390/met14050533 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 30.04.2024. Verfasst von Yancheng Yang und 8 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Major Project of China, Basic and Applied Basic Research Foundation of Guangdong Province of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The microstructure characteristics of TiAl alloy prepared by laser-directed energy deposition (L-DED) are coarse columnar grains parallel to the building direction, which results in serious mechanical properties and anisotropy and limits its application. In the present study, TiB2 can be used as an effective grain refiner due to the extremely high Q value (growth inhibition factor; the larger the Q value of an alloying element, the stronger its grain refinement effect.) of B. With TiB2 addition, TiAl alloys prepared by laser-directed energy deposition with the microstructure of full equiaxed grains were obtained, and the grain size was significantly reduced by about 30% with 0.45 wt.% TiB2. This value has been further increased to 45% when adding 0.9 wt.% TiB2. Moreover, the γm phase was nearly eliminated and the width of (α2 + γ) lamellar was significantly decreased, which has positive effects on mechanical properties. Meanwhile, TiB2 precipitates uniformly distribute in the matrix, as a reinforced particle to increase the hardness and compressive strength of the alloys. The microhardness of the TiAl alloy increased with the increasing content of TiB2. The addition of TiB2 improved the room and high-temperature compressive properties of TiAl alloy while slightly increasing its ductility. These findings have important guiding significance for expanding the application of TiAl alloys.

Förderung

  • National Science and Technology Major Project of China
  • Basic and Applied Basic Research Foundation of Guangdong Province of China

Zitieren

APA

Yang, Y., Hu, Y., Chen, H., Li, Y., Wang, J., Cheng, X., Tang, H., Ran, X., & Liu, D. (2024). Effect of TiB2 Addition on the Microstructure and Mechanical Properties of Laser-Directed Energy Deposition TiAl Alloy. Metals, 14(5), 533. https://doi.org/10.3390/met14050533

Vancouver

Yang Y, Hu Y, Chen H, Li Y, Wang J, Cheng X, et al. Effect of TiB2 Addition on the Microstructure and Mechanical Properties of Laser-Directed Energy Deposition TiAl Alloy. Metals. 2024;14(5):533. doi:10.3390/met14050533

BibTeX
@article{Yang2024,
  author = {Yang, Yancheng and Hu, Yi and Chen, Hongyan and Li, Yu and Wang, Jiawei and Cheng, Xu and Tang, Haibo and Ran, Xianzhe and Liu, Dong},
  title = {Effect of TiB2 Addition on the Microstructure and Mechanical Properties of Laser-Directed Energy Deposition TiAl Alloy},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {5},
  pages = {533},
  doi = {10.3390/met14050533}
}
Kostenlos starten →