EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Hot Deformation and Heat Treatment on the Microstructure and Properties of Spray-Formed Al-Zn-Mg-Cu Alloys

Lingfei Cao, Xiaomin Lin, Zhenghao Zhang, Min Bai, Xiaodong Wu

Metals · 11.04.2024 · 14 (4) · 451

DOI: 10.3390/met14040451 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 11.04.2024. Verfasst von Lingfei Cao und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 162 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Chongqing, China, Chongqing Key Project for Technological Innovation and Application, Opening Project of State Key Laboratory for Advanced Metals and Materials.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Spray forming is a manufacturing process that enables the production of high-performance metallic materials with exceptional properties. Due to its rapid solidification nature, spray forming can produce materials that exhibit fine, uniform, and equiaxed microstructures, with low micro-segregation, high solubility, and excellent workability. Al-Zn-Mg-Cu alloys have been widely used in the aerospace field due to their excellent properties, i.e., high strength, low density, and outstanding machinability. The alloy manufactured by spray forming has a combination of better impact properties and higher specific strength, due to its higher cooling rate, higher solute concentration, and lower segregation. In this manuscript, the recent development of spray-formed Al-Zn-Mg-Cu alloys is briefly reviewed. The influence of hot working, i.e., hot extrusion, hot forging, and hot rolling, as well as different heat treatments on the property and microstructure of spray-formed Al-Zn-Mg-Cu alloys is introduced. The second phases and their influence on the microstructure and mechanical properties are summarized. Finally, the potential in high-temperature applications and future prospects of spray-formed aluminum alloys are discussed.

Förderung

  • Natural Science Foundation of Chongqing, China
  • Chongqing Key Project for Technological Innovation and Application
  • Opening Project of State Key Laboratory for Advanced Metals and Materials

Zitieren

APA

Cao, L., Lin, X., Zhang, Z., Bai, M., & Wu, X. (2024). Effect of Hot Deformation and Heat Treatment on the Microstructure and Properties of Spray-Formed Al-Zn-Mg-Cu Alloys. Metals, 14(4), 451. https://doi.org/10.3390/met14040451

Vancouver

Cao L, Lin X, Zhang Z, Bai M, Wu X. Effect of Hot Deformation and Heat Treatment on the Microstructure and Properties of Spray-Formed Al-Zn-Mg-Cu Alloys. Metals. 2024;14(4):451. doi:10.3390/met14040451

BibTeX
@article{Cao2024,
  author = {Cao, Lingfei and Lin, Xiaomin and Zhang, Zhenghao and Bai, Min and Wu, Xiaodong},
  title = {Effect of Hot Deformation and Heat Treatment on the Microstructure and Properties of Spray-Formed Al-Zn-Mg-Cu Alloys},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {4},
  pages = {451},
  doi = {10.3390/met14040451}
}
Kostenlos starten →