EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Suppression of Inhomogeneous Plastic Deformation in Medium-Carbon Tempered Martensite Steel

Hai Qiu, Rintaro Ueji, Tadanobu Inoue

Metals · 04.03.2024 · 14 (3) · 306

DOI: 10.3390/met14030306 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 04.03.2024. Verfasst von Hai Qiu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technical Research Aid of the JFE 21st Century Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Lüders phenomenon is one type of inhomogeneous plastic deformation occurring in the elastic-to-plastic transition region, and it is an undesirable plastic deformation behavior. Although conventional measures based on the chemical composition design, plasticity processing principle, or utilization of composited microstructures are used to suppress this phenomenon in engineering, demerits are present, such as high cost and low fracture behavior. The Lüders phenomenon begins with the formation of plastic bands (inhomogeneous yielding) at one or several local sites. If yielding simultaneously occurs everywhere rather than at several local sites, the formation of local plastic bands will be inhibited; as a result, the Lüders deformation will be suppressed. Based on this idea, a new approach was proposed in which the number of local yield sites was increased by heat treatments. A medium-carbon tempered martensite steel (Fe-0.3C-1.5Mn, in wt%) was used to verify the validity of the new approach, and the optimum heat-treatment conditions for the balance of mechanical property and deformation behavior were determined.

Förderung

  • Technical Research Aid of the JFE 21st Century Foundation

Zitieren

APA

Qiu, H., Ueji, R., & Inoue, T. (2024). Suppression of Inhomogeneous Plastic Deformation in Medium-Carbon Tempered Martensite Steel. Metals, 14(3), 306. https://doi.org/10.3390/met14030306

Vancouver

Qiu H, Ueji R, Inoue T. Suppression of Inhomogeneous Plastic Deformation in Medium-Carbon Tempered Martensite Steel. Metals. 2024;14(3):306. doi:10.3390/met14030306

BibTeX
@article{Qiu2024,
  author = {Qiu, Hai and Ueji, Rintaro and Inoue, Tadanobu},
  title = {Suppression of Inhomogeneous Plastic Deformation in Medium-Carbon Tempered Martensite Steel},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {3},
  pages = {306},
  doi = {10.3390/met14030306}
}
Kostenlos starten →