EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quality Assurance in Resistance Spot Welding: State of Practice, State of the Art, and Prospects

Panagiotis Stavropoulos, Kyriakos Sabatakakis

Metals · 02.02.2024 · 14 (2) · 185

DOI: 10.3390/met14020185 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 02.02.2024. Verfasst von Panagiotis Stavropoulos und 1 weiteren Autor:innen. Die Arbeit wurde bisher 46-mal zitiert (Crossref) und nennt 94 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s Horizon 2020 research, H2020 EU Project DIMOFAC-Digital Intelligent MOdular FACtories.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Resistance spot welding is a process with high variability regarding the quality of the produced joints. This means that key performance indicators (KPIs) such as geometrical and mechanical features as well as failure modes can deviate from the initial design even if the same process parameters are used. The industry has developed quality assurance programs and quality control methods for tracking these KPIs; however, most of them are based on offline or/and destructive practices. On the other hand, state-of-the-art approaches have made online quality assessment feasible and proved its necessity if a 100% quality rate is required. However, limited attention has been given to “closing the loop” and providing feedback for preventing and correcting process anomalies that cause quality variations in real time. In this study, the main gaps between the state of practice and the state of the art are discussed in the context of quality assurance for resistance spot welding. Finally, the role and importance of digital twins by taking into consideration the entire welding ecosystem in quality assurance are discussed in order to form the prospects for the road ahead.

Förderung

  • European Union’s Horizon 2020 research
  • H2020 EU Project DIMOFAC-Digital Intelligent MOdular FACtories

Zitieren

APA

Stavropoulos, P., & Sabatakakis, K. (2024). Quality Assurance in Resistance Spot Welding: State of Practice, State of the Art, and Prospects. Metals, 14(2), 185. https://doi.org/10.3390/met14020185

Vancouver

Stavropoulos P, Sabatakakis K. Quality Assurance in Resistance Spot Welding: State of Practice, State of the Art, and Prospects. Metals. 2024;14(2):185. doi:10.3390/met14020185

BibTeX
@article{Stavropoulos2024,
  author = {Stavropoulos, Panagiotis and Sabatakakis, Kyriakos},
  title = {Quality Assurance in Resistance Spot Welding: State of Practice, State of the Art, and Prospects},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {2},
  pages = {185},
  doi = {10.3390/met14020185}
}
Kostenlos starten →