Heat Treatment Process, Microstructure, and Mechanical Properties of Spring Steel with Ultra-High Strength and Toughness
Metals · 01.02.2024 · 14 (2) · 180
DOI: 10.3390/met14020180 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 01.02.2024. Verfasst von Fang Shi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hunan Valin Xiangtan Iron and Steel Co., Ltd..
Abstract (Originalsprache)
In this research, a new type of spring steel with ultra-high strength and toughness was designed, and its mechanical properties and microstructure under different heat treatment processes were studied. The results show that the optimal heat treatment process for the steel is oil quenching at 890 °C for 40 min, followed by tempering at 400 °C for 1 h. Its mechanical properties have an optimal combination of 1865MPa tensile strength, a yield strength of 1662 MPa, an elongation of 11.5%, a cross-sectional shrinkage of 51.5%, and a Charpy impact energy of 43.7 J at room temperature. With increasing austenitizing temperature, the austenite grain size increases, the martensite lath becomes thicker, and the strength decreases. With increasing tempering temperature, the lath boundary of martensite becomes blurred, the strength decreases, and the plasticity improves. In addition, it was found that during tempering at higher temperature (450 °C), large particle inclusions and secondary cracks appeared in the fractured surface, and a large number of carbides precipitated, leading to the brittleness of tempered martensite.
Förderung
- Hunan Valin Xiangtan Iron and Steel Co., Ltd.
Zitieren
APA
Shi, F., Zheng, J., Zhang, J., Zhao, Y., & Chen, L. (2024). Heat Treatment Process, Microstructure, and Mechanical Properties of Spring Steel with Ultra-High Strength and Toughness. Metals, 14(2), 180. https://doi.org/10.3390/met14020180
Vancouver
Shi F, Zheng J, Zhang J, Zhao Y, Chen L. Heat Treatment Process, Microstructure, and Mechanical Properties of Spring Steel with Ultra-High Strength and Toughness. Metals. 2024;14(2):180. doi:10.3390/met14020180
BibTeX
@article{Shi2024,
author = {Shi, Fang and Zheng, Jian and Zhang, Jie and Zhao, Yang and Chen, Liqing},
title = {Heat Treatment Process, Microstructure, and Mechanical Properties of Spring Steel with Ultra-High Strength and Toughness},
journal = {Metals},
year = {2024},
volume = {14},
number = {2},
pages = {180},
doi = {10.3390/met14020180}
}
EUVIMED