A Review of Deformation Mechanisms, Compositional Design, and Development of Titanium Alloys with Transformation-Induced Plasticity and Twinning-Induced Plasticity Effects
Metals · 13.01.2024 · 14 (1) · 97
DOI: 10.3390/met14010097 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 13.01.2024. Verfasst von Yu Fu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 70-mal zitiert (Crossref) und nennt 146 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Youth Talent Support Program of Beihang University.
Abstract (Originalsprache)
Metastable β-type Ti alloys that undergo stress-induced martensitic transformation and/or deformation twinning mechanisms have the potential to simultaneously enhance strength and ductility through the transformation-induced plasticity effect (TRIP) and twinning-induced plasticity (TWIP) effect. These TRIP/TWIP Ti alloys represent a new generation of strain hardenable Ti alloys, holding great promise for structural applications. Nonetheless, the relatively low yield strength is the main factor limiting the practical applications of TRIP/TWIP Ti alloys. The intricate interplay among chemical compositions, deformation mechanisms, and mechanical properties in TRIP/TWIP Ti alloys poses a challenge for the development of new TRIP/TWIP Ti alloys. This review delves into the understanding of deformation mechanisms and strain hardening behavior of TRIP/TWIP Ti alloys and summarizes the role of β phase stability, α″ martensite, α′ martensite, and ω phase on the TRIP/TWIP effects. This is followed by the introduction of compositional design strategies that empower the precise design of new TRIP/TWIP Ti alloys through multi-element alloying. Then, the recent development of TRIP/TWIP Ti alloys and the strengthening strategies to enhance their yield strength while preserving high-strain hardening capability are summarized. Finally, future prospects and suggestions for the continued design and development of high-performance TRIP/TWIP Ti alloys are highlighted.
Förderung
- National Natural Science Foundation of China
- Youth Talent Support Program of Beihang University
Zitieren
APA
Fu, Y., Gao, Y., Jiang, W., Xiao, W., Zhao, X., & Ma, C. (2024). A Review of Deformation Mechanisms, Compositional Design, and Development of Titanium Alloys with Transformation-Induced Plasticity and Twinning-Induced Plasticity Effects. Metals, 14(1), 97. https://doi.org/10.3390/met14010097
Vancouver
Fu Y, Gao Y, Jiang W, Xiao W, Zhao X, Ma C. A Review of Deformation Mechanisms, Compositional Design, and Development of Titanium Alloys with Transformation-Induced Plasticity and Twinning-Induced Plasticity Effects. Metals. 2024;14(1):97. doi:10.3390/met14010097
BibTeX
@article{Fu2024,
author = {Fu, Yu and Gao, Yue and Jiang, Wentao and Xiao, Wenlong and Zhao, Xinqing and Ma, Chaoli},
title = {A Review of Deformation Mechanisms, Compositional Design, and Development of Titanium Alloys with Transformation-Induced Plasticity and Twinning-Induced Plasticity Effects},
journal = {Metals},
year = {2024},
volume = {14},
number = {1},
pages = {97},
doi = {10.3390/met14010097}
}
EUVIMED