EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modification of Johnson–Cook Constitutive Parameters in Ball Burnish Simulation of 7075-T651 Aluminum Alloy

Danqing Yin, Haoqi Zhao, Yunfeng Chen, Junming Chang, Yonglei Wang, Xiaoqiang Wang

Metals · 08.12.2023 · 13 (12) · 1992

DOI: 10.3390/met13121992 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 08.12.2023. Verfasst von Danqing Yin und 5 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Henan Province Science and Technology Research, The Henan Province college youth backbone teacher.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Johnson–Cook model is widely used because of its ability to meet the simulation material requirements in various situations. However, under different working conditions, the accuracy of the model may have errors. In this work, based on Abaqus (Abaqus R2022 Education Edition, Dassault Systèmes, Paris, France) simulation software, Johnson–Cook (JC) constitutive model parameters and compression parameters were selected to simulate the improvement of surface roughness during the ball milling of a 7075-T651 aluminum alloy. In the numerical simulation of ball polishing, the changes in the residual stress field when the Johnson–Cook parameters change are analyzed. By comparing the numerically simulated residual stress fields under the JC parameters calculated at different strain rates, a set of parameters that agrees with the experimental values is selected. The results show that the residual stresses are in line with the experimental values when the strain rate is 10−4s −1. The changes in roughness corresponding to the selected parameters are analyzed. The results indicate that the simulated trend of roughness variation is consistent with the experimental values, and the optimal surface roughness value under a static pressure of 300 N is obtained.

Förderung

  • National Natural Science Foundation of China
  • Henan Province Science and Technology Research
  • The Henan Province college youth backbone teacher

Zitieren

APA

Yin, D., Zhao, H., Chen, Y., Chang, J., Wang, Y., & Wang, X. (2023). Modification of Johnson–Cook Constitutive Parameters in Ball Burnish Simulation of 7075-T651 Aluminum Alloy. Metals, 13(12), 1992. https://doi.org/10.3390/met13121992

Vancouver

Yin D, Zhao H, Chen Y, Chang J, Wang Y, Wang X. Modification of Johnson–Cook Constitutive Parameters in Ball Burnish Simulation of 7075-T651 Aluminum Alloy. Metals. 2023;13(12):1992. doi:10.3390/met13121992

BibTeX
@article{Yin2023,
  author = {Yin, Danqing and Zhao, Haoqi and Chen, Yunfeng and Chang, Junming and Wang, Yonglei and Wang, Xiaoqiang},
  title = {Modification of Johnson–Cook Constitutive Parameters in Ball Burnish Simulation of 7075-T651 Aluminum Alloy},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {12},
  pages = {1992},
  doi = {10.3390/met13121992}
}
Kostenlos starten →