Microstructure and Bonding Strength of Low-Temperature Sintered Ag/Nano-Ag Films/Ag Joints
Metals · 31.10.2023 · 13 (11) · 1833
DOI: 10.3390/met13111833 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 31.10.2023. Verfasst von Lihua Gao und 3 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Technology Development Project in Fujian province, Key Science Project in Henan province.
Abstract (Originalsprache)
Nano-Ag paste is one of the most widely used die-attachment materials in modern electronic devices, which are gaining continuously increasing application in transportation industries. The nano-Ag film in a pre-formed dimension and free from the use of chemical dispersing agents has been proposed to be a promising alternative to nano-Ag paste for the die-attachment application. Although the bonding mechanisms of Nano-Ag paste have been extensively studied, little is known about the relationship between the microstructure and mechanical properties of low-temperature-sintered Ag/nano-Ag film/Ag joints. In this work, the influences of temperature, pressure, and dwell time at peak temperature on the microstructure and the shear strength of low-temperature-sintered Ag/nano-Ag film/Ag joints were systematically investigated. Mechanical properties tests indicate that both temperature and pressure have pronounced effects on the bonding strength of sintered Ag/nano-Ag film/Ag joints. TEM and hot nanoindentation characterizations further reveal that the sintering temperature plays the most determinant role in the coarsening of nano-Ag film and, hence, the bonding and fracture behaviors of Ag/nano-Ag film/Ag joints sintered at 210–290 °C. The diffusion-induced coarsening of nano-Ag particles can be activated, but remains sluggish at 250 °C, and the mechanical integrity of sintered joints is circumscribed by the interfacial bonding between nano-Ag film and Ag substrate after sintering at 290 °C.
Förderung
- National Technology Development Project in Fujian province
- Key Science Project in Henan province
Zitieren
APA
Gao, L., Zou, S., Zheng, C., & Mu, D. (2023). Microstructure and Bonding Strength of Low-Temperature Sintered Ag/Nano-Ag Films/Ag Joints. Metals, 13(11), 1833. https://doi.org/10.3390/met13111833
Vancouver
Gao L, Zou S, Zheng C, Mu D. Microstructure and Bonding Strength of Low-Temperature Sintered Ag/Nano-Ag Films/Ag Joints. Metals. 2023;13(11):1833. doi:10.3390/met13111833
BibTeX
@article{Gao2023,
author = {Gao, Lihua and Zou, Shuangyang and Zheng, Changcheng and Mu, Dekui},
title = {Microstructure and Bonding Strength of Low-Temperature Sintered Ag/Nano-Ag Films/Ag Joints},
journal = {Metals},
year = {2023},
volume = {13},
number = {11},
pages = {1833},
doi = {10.3390/met13111833}
}
EUVIMED