Effects of Current Density and Bath Temperature on the Morphological and Anticorrosive Properties of Zn-Ni Alloys
Metals · 26.10.2023 · 13 (11) · 1808
DOI: 10.3390/met13111808 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 26.10.2023. Verfasst von Josiane D. Costa und 12 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Brazilian National Council for Scientific and Technological Development, Paraíba State Research Support Foundation (FAPESQ-PB), Brazilian Coordination for the Improvement of Higher Education Personnel (CAPES).
Abstract (Originalsprache)
The effect of current density and bath temperature in the electroplating process on resistance to corrosion of Zn-Ni alloys was evaluated in this work. The electrolytic bath consisted of nickel sulfate, zinc sulfate, sodium sulfate, boric acid, and sodium citrate at pH 7.0. The current density was varied in the range 20–80 mA/cm2 and the bath temperature in the range 30–60 °C. Increasing, independently, the current density or the bath temperature increased the nickel content in the obtained alloy, which affected the alloy microstructure, with a predominant γ phase and cauliflower-like morphology. The nickel content in the alloys was in the range 20–42%wt. A synergistic effect between the current density and bath temperature was observed from a design of experiments and response surface models. The maximum resistance to corrosion occurred for the alloy containing 42%wt. nickel. This alloy was obtained at upper levels of current density and bath temperature, presenting a corrosion potential of −0.789 V and polarization resistance of 4136 Ω.cm2.
Förderung
- Brazilian National Council for Scientific and Technological Development
- Paraíba State Research Support Foundation (FAPESQ-PB)
- Brazilian Coordination for the Improvement of Higher Education Personnel (CAPES)
- national funds (PIDDAC) through FCT/MCTES
- CONSTRUCT-Instituto de I&D em Estruturas e Construções
- FCT—Fundação para a Ciência e a Tecnologia
Zitieren
APA
Costa, J. D., Almeida, A. F., Santana, R. A. C., Campos, A. R. N., Oliveira, J. A. M., Alves, J. J. N., Santos, T. F. A., Silva, A. A., Prasad, S., Silva, P. C. S., Souza, E. L. S., Delgado, J. M. P. Q., & Lima, A. G. B. (2023). Effects of Current Density and Bath Temperature on the Morphological and Anticorrosive Properties of Zn-Ni Alloys. Metals, 13(11), 1808. https://doi.org/10.3390/met13111808
Vancouver
Costa JD, Almeida AF, Santana RAC, Campos ARN, Oliveira JAM, Alves JJN, et al. Effects of Current Density and Bath Temperature on the Morphological and Anticorrosive Properties of Zn-Ni Alloys. Metals. 2023;13(11):1808. doi:10.3390/met13111808
BibTeX
@article{Costa2023,
author = {Costa, Josiane D. and Almeida, Arthur F. and Santana, Renato A. C. and Campos, Ana R. N. and Oliveira, José A. M. and Alves, José J. N. and Santos, Tiago F. A. and Silva, Antônio A. and Prasad, Shiva and Silva, Paulo C. S. and Souza, Evelyn L. S. and Delgado, João M. P. Q. and Lima, Antonio G. B.},
title = {Effects of Current Density and Bath Temperature on the Morphological and Anticorrosive Properties of Zn-Ni Alloys},
journal = {Metals},
year = {2023},
volume = {13},
number = {11},
pages = {1808},
doi = {10.3390/met13111808}
}
EUVIMED