EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Microscopic Mechanism of Axle Steel EA4T during Uniaxial Cyclic Deformation Process

Xuehong Ren, Shaopu Yang, Wenjie Zhao, Guilin Wen

Metals · 31.07.2023 · 13 (8) · 1379

DOI: 10.3390/met13081379 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 31.07.2023. Verfasst von Xuehong Ren und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to reveal the dislocation evolution law of body-centered cubic axle steel EA4T during cyclic deformation and provide an experimental basis for the subsequent construction of cyclic constitutive models based on microscopic physical mechanisms, macroscopic deformation experiments were first conducted on axle steel EA4T, including monotonic tensile experiments under different deformation amounts, symmetric strain cycling experiments under a different number of cycles, and ratcheting deformation experiments under a different number of cycles. Then, systematic observations of different samples at different deformation stages were conducted using a Transmission Electron Microscope (TEM) to investigate the dislocation configuration and evolution during strain cycling and ratcheting deformation. The observed results show that the dislocation evolution law of axle steel EA4T during the uniaxial tensile experiment, symmetrical strain cycling, and ratcheting deformation is basically the same, and the dislocation density increases with the increase in plastic deformation and number of cycles. The dislocation configuration gradually develops from low-density dislocation configurations such as dislocation lines and dislocation pileups to high-density dislocation configurations such as severe dislocation tangles and dislocation walls. The microscopic mechanism of the uniaxial ratcheting evolution of axle steel EA4T can be qualitatively explained by the dislocation configuration and evolution.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Ren, X., Yang, S., Zhao, W., & Wen, G. (2023). Study on the Microscopic Mechanism of Axle Steel EA4T during Uniaxial Cyclic Deformation Process. Metals, 13(8), 1379. https://doi.org/10.3390/met13081379

Vancouver

Ren X, Yang S, Zhao W, Wen G. Study on the Microscopic Mechanism of Axle Steel EA4T during Uniaxial Cyclic Deformation Process. Metals. 2023;13(8):1379. doi:10.3390/met13081379

BibTeX
@article{Ren2023,
  author = {Ren, Xuehong and Yang, Shaopu and Zhao, Wenjie and Wen, Guilin},
  title = {Study on the Microscopic Mechanism of Axle Steel EA4T during Uniaxial Cyclic Deformation Process},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {8},
  pages = {1379},
  doi = {10.3390/met13081379}
}
Kostenlos starten →