A Review of Additive Manufacturing Techniques and Post-Processing for High-Temperature Titanium Alloys
Metals · 25.07.2023 · 13 (8) · 1327
DOI: 10.3390/met13081327 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 25.07.2023. Verfasst von Binquan Jin und 7 weiteren Autor:innen. Die Arbeit wurde bisher 60-mal zitiert (Crossref) und nennt 146 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Zhejiang Province.
Abstract (Originalsprache)
Owing to excellent high-temperature mechanical properties, i.e., high heat resistance, high strength, and high corrosion resistance, Ti alloys can be widely used as structural components, such as blades and wafers, in aero-engines. Due to the complex shapes, however, it is difficult to fabricate these components via traditional casting or plastic forming. It has been proved that additive manufacturing (AM) is an effective method of manufacturing such complex components. In this study, four main additive manufacturing processes for Ti alloy components were reviewed, including laser powder bed melting (SLM), electron beam powder bed melting (EBM), wire arc additive manufacturing (WAAM), and cold spraying additive manufacturing (CSAM). Meanwhile, the technological process and mechanical properties at high temperature were summarized. It is proposed that the additive manufacturing of titanium alloys follows a progressive path comprising four key developmental stages and research directions: investigating printing mechanisms, optimizing process parameters, in situ addition of trace elements, and layered material design. It is crucial to consider the development stage of each specific additive manufacturing process in order to select appropriate research directions. Moreover, the corresponding post-treatment was also analyzed to tailor the microstructure and high-temperature mechanical properties of AMed Ti alloys. Thereafter, to improve the mechanical properties of the product, it is necessary to match the post-treatment method with an appropriate additive manufacturing process. The additive manufacturing and the following post-treatment are expected to gradually meet the high-temperature mechanical requirements of all kinds of high-temperature structural components of Ti alloys.
Förderung
- Natural Science Foundation of Zhejiang Province
Zitieren
APA
Jin, B., Wang, Q., Zhao, L., Pan, A., Ding, X., Gao, W., Song, Y., & Zhang, X. (2023). A Review of Additive Manufacturing Techniques and Post-Processing for High-Temperature Titanium Alloys. Metals, 13(8), 1327. https://doi.org/10.3390/met13081327
Vancouver
Jin B, Wang Q, Zhao L, Pan A, Ding X, Gao W, et al. A Review of Additive Manufacturing Techniques and Post-Processing for High-Temperature Titanium Alloys. Metals. 2023;13(8):1327. doi:10.3390/met13081327
BibTeX
@article{Jin2023,
author = {Jin, Binquan and Wang, Qing and Zhao, Lizhong and Pan, Anjian and Ding, Xuefeng and Gao, Wei and Song, Yufeng and Zhang, Xuefeng},
title = {A Review of Additive Manufacturing Techniques and Post-Processing for High-Temperature Titanium Alloys},
journal = {Metals},
year = {2023},
volume = {13},
number = {8},
pages = {1327},
doi = {10.3390/met13081327}
}
EUVIMED