EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Wear Resistance of Ni-Co-ZrO2 Composite Coatings with Different ZrO2 Nanoparticle Concentrations Prepared Using Electrodeposition on the Micro-Surface of Spindle Hook Teeth

Tianxin Dong, Xingyu Wang, Fei Li, Yifan Zhu, Xiuqing Fu

Metals · 09.07.2023 · 13 (7) · 1251

DOI: 10.3390/met13071251 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 09.07.2023. Verfasst von Tianxin Dong und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Universities, Student Innovation Research and Entrepreneurship Training.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve the wear resistance of the surface of the cotton picker spindle, a Ni-Co-ZrO2 composite coating with different ZrO2 nanoparticle concentrations was prepared using electrodeposition technology on the micro surface of spindle hook teeth, and the morphologies of the surface and cross-section, element contents, grain sizes, microhardness and friction coefficients of the Ni-Co-ZrO2 composite coating were obtained; a simulated wear test was conducted based on the independently developed spindle hook tooth wear device, and the morphologies and elemental distributions of the composite coating before and after wear were obtained; the effects of different ZrO2 nanoparticle concentrations (0, 2, 4, 6, 8 g/L) on the morphology, element content, grain size, microhardness, friction coefficient and wear resistance of the coating were discussed. The test results indicated that compared with Ni-Co coatings, Ni-Co-ZrO2 composite coatings featured a more compact coating structure, a greater coating thickness, and a smaller grain size. The presence of ZrO2 nanoparticles led to further improvement of the coating’s microhardness, friction coefficient and wear resistance. When the mass concentration of ZrO2 nanoparticles reached 4 g/L, the microhardness of Ni-Co-ZrO2 composite coating reached the maximum value, 545.4 Hv0.1, and the friction coefficient decreased to 0.06. At the same time, in the simulated wear test, the composite coating with this concentration had the smallest wear area and the highest wear resistance.

Förderung

  • Fundamental Research Funds for the Central Universities
  • Student Innovation Research and Entrepreneurship Training

Zitieren

APA

Dong, T., Wang, X., Li, F., Zhu, Y., & Fu, X. (2023). Study on the Wear Resistance of Ni-Co-ZrO2 Composite Coatings with Different ZrO2 Nanoparticle Concentrations Prepared Using Electrodeposition on the Micro-Surface of Spindle Hook Teeth. Metals, 13(7), 1251. https://doi.org/10.3390/met13071251

Vancouver

Dong T, Wang X, Li F, Zhu Y, Fu X. Study on the Wear Resistance of Ni-Co-ZrO2 Composite Coatings with Different ZrO2 Nanoparticle Concentrations Prepared Using Electrodeposition on the Micro-Surface of Spindle Hook Teeth. Metals. 2023;13(7):1251. doi:10.3390/met13071251

BibTeX
@article{Dong2023,
  author = {Dong, Tianxin and Wang, Xingyu and Li, Fei and Zhu, Yifan and Fu, Xiuqing},
  title = {Study on the Wear Resistance of Ni-Co-ZrO2 Composite Coatings with Different ZrO2 Nanoparticle Concentrations Prepared Using Electrodeposition on the Micro-Surface of Spindle Hook Teeth},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {7},
  pages = {1251},
  doi = {10.3390/met13071251}
}
Kostenlos starten →