Spectroscopical Characterization of Copper–Iron (Cu-Fe) Alloy Plasma Using LIBS, ICP-AES, and EDX
Metals · 27.06.2023 · 13 (7) · 1188
DOI: 10.3390/met13071188 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 27.06.2023. Verfasst von Amir Fayyaz und 6 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Princess Nourah Bint Abdulrahman University Researchers Supporting Project, Princess Nourah Bint Abdulrahman University, Riyadh, Saudi Arabia, Deanship of Scientific Research at King Khalid University.
Abstract (Originalsprache)
In this present work, we demonstrated a spectral characterization of copper–iron (Cu-Fe) alloy using optical emission spectroscopy. The Cu-Fe alloy plasma was generated on the target sample surface by directing the laser pulse of Q-switched Nd: YAG of the second harmonic (2ω) with a 532 nm optical wavelength. The optical emission spectrum was acquired using five miniature spectrometers that lie within the wavelength range of 200–720 nm. The emission plasma was characterized by validating the local-thermodynamical equilibrium (LTE) as well as optically thin (OT) plasma condition. In addition, the LTE condition was verified using the McWhirter criterion, and the OT condition was validated by comparing theoretically calculated intensity ratios with experimental ones. Plasma parameters, including electron number density as well as plasma temperature, were estimated. In the first stage, the plasma temperature was estimated using the Boltzmann-plot method and the two-line method. The average calculated value of the plasma temperatures were 8014 ± 800 K and 8044 ± 800 K using the Boltzmann-plot and two-line methods, respectively. In the second stage, electron number density was estimated using the Saha–Boltzmann equation and stark-broadening method (SBM). The average number density calculated from the SBM was 2.73×1016 cm−3 and from the Saha–Boltzmann equation was 3.9×1016 cm−3, showing a good agreement. Finally, the comparative compositional analysis was performed using CF-LIBS, Boltzmann Intercept Method, EDX, and ICP-AES, which showed good agreement with that of the standard composition.
Förderung
- Princess Nourah Bint Abdulrahman University Researchers Supporting Project
- Princess Nourah Bint Abdulrahman University, Riyadh, Saudi Arabia
- Deanship of Scientific Research at King Khalid University
Zitieren
APA
Fayyaz, A., Iqbal, J., Asghar, H., Alrebdi, T. A., Alshehri, A. M., Ahmed, W., & Ahmed, N. (2023). Spectroscopical Characterization of Copper–Iron (Cu-Fe) Alloy Plasma Using LIBS, ICP-AES, and EDX. Metals, 13(7), 1188. https://doi.org/10.3390/met13071188
Vancouver
Fayyaz A, Iqbal J, Asghar H, Alrebdi TA, Alshehri AM, Ahmed W, et al. Spectroscopical Characterization of Copper–Iron (Cu-Fe) Alloy Plasma Using LIBS, ICP-AES, and EDX. Metals. 2023;13(7):1188. doi:10.3390/met13071188
BibTeX
@article{Fayyaz2023,
author = {Fayyaz, Amir and Iqbal, Javed and Asghar, Haroon and Alrebdi, Tahani A. and Alshehri, Ali M. and Ahmed, Waqas and Ahmed, Nasar},
title = {Spectroscopical Characterization of Copper–Iron (Cu-Fe) Alloy Plasma Using LIBS, ICP-AES, and EDX},
journal = {Metals},
year = {2023},
volume = {13},
number = {7},
pages = {1188},
doi = {10.3390/met13071188}
}
EUVIMED