EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Phase Transformation Behaviors and Dislocation Evolutions of an Additively Manufactured Ti-6Al-4V Alloy under Annealing Treatment

Xiankun Ji, Haiming Xie, Jinlong Su, Fulin Jiang, Jie Teng, Hui Zhang, Baoqi Guo

Metals · 01.06.2023 · 13 (6) · 1061

DOI: 10.3390/met13061061 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 01.06.2023. Verfasst von Xiankun Ji und 6 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Post-graduate Scientific Research Innovation Project of Hunan Province, AECC Hunan Aviation Powerplant Research Institute.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Post annealing treatment is generally needed for additively manufactured titanium alloy to decompose metastable phases, alleviate residual stress, and improve ductility. In this work, in-situ electrical resistivity and line profile analysis of X-ray diffraction were utilized for monitoring phase transformation behaviors and dislocation evolutions of a laser powder bed fusion-built Ti-6Al-4V alloy under post annealing treatment. Besides, hardness and tensile tests were adopted for revealing the effects of phase transformation and dislocation evolutions on the mechanical properties. The results indicated that post annealing treatment decomposed martensitic α′ into lamellar α + β and eliminated dislocations efficiently. The martensite decomposition rate increased with the annealing temperature. Annealing at 700 °C for 4 h eliminated 98% of the dislocations, and further annealing has only a limited influence on the dislocation density. Annealing at 700 °C for 16 h is beneficial for achieving a high ductility of 10.3% owing to the favorable equilibrium lamellar α + β microstructure. These findings provide valuable insights for optimizing post annealing treatment procedures to enhance the mechanical properties of additively manufactured Ti-6Al-4V alloys.

Förderung

  • Post-graduate Scientific Research Innovation Project of Hunan Province
  • AECC Hunan Aviation Powerplant Research Institute

Zitieren

APA

Ji, X., Xie, H., Su, J., Jiang, F., Teng, J., Zhang, H., & Guo, B. (2023). Phase Transformation Behaviors and Dislocation Evolutions of an Additively Manufactured Ti-6Al-4V Alloy under Annealing Treatment. Metals, 13(6), 1061. https://doi.org/10.3390/met13061061

Vancouver

Ji X, Xie H, Su J, Jiang F, Teng J, Zhang H, et al. Phase Transformation Behaviors and Dislocation Evolutions of an Additively Manufactured Ti-6Al-4V Alloy under Annealing Treatment. Metals. 2023;13(6):1061. doi:10.3390/met13061061

BibTeX
@article{Ji2023,
  author = {Ji, Xiankun and Xie, Haiming and Su, Jinlong and Jiang, Fulin and Teng, Jie and Zhang, Hui and Guo, Baoqi},
  title = {Phase Transformation Behaviors and Dislocation Evolutions of an Additively Manufactured Ti-6Al-4V Alloy under Annealing Treatment},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {6},
  pages = {1061},
  doi = {10.3390/met13061061}
}
Kostenlos starten →