EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving Mechanical Property of Hyper-Eutectic Al-Si Alloys via Regulating the Microstructure by Rheo-Die-Casting

Zhaohua Hu, Qile Huo, Yaxin Chen, Manping Liu, Xuefei Chen

Metals · 17.05.2023 · 13 (5) · 968

DOI: 10.3390/met13050968 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 17.05.2023. Verfasst von Zhaohua Hu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Project Internationalized Construction of Teachers of Jiangsu University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The microstructure plays a key role in the mechanical properties of hyper-eutectic Al-Si alloys. In this study, we investigate the microstructural evolution of rheo-die-casting (RDC) on the Al-15Si-4Cu-0.5Mg alloy using a mechanical rotational barrel system. Our findings demonstrate that higher rotational speed and pouring temperature reduce the size and roundness of primary Si particles in the semisolid slurry. Additionally, during RDC, the dendritic aluminum matrix and skeletal iron-containing inter metallics are sheared off, leading to a more uniform and dispersed Al2Cu phase. Ultimately, our rheo-diecasting results indicate the formation of a near globular aluminum matrix, fine primary Si particles, and a homogeneous Al2Cu phase, thus highlighting the efficacy of this processing method for improving the microstructure and properties of the Al-15Si-4Cu-0.5Mg alloy. We suggest that these results hold promise for enhancing the quality of aluminum-based alloys in various industrial applications.

Förderung

  • National Natural Science Foundation of China
  • Project Internationalized Construction of Teachers of Jiangsu University

Zitieren

APA

Hu, Z., Huo, Q., Chen, Y., Liu, M., & Chen, X. (2023). Improving Mechanical Property of Hyper-Eutectic Al-Si Alloys via Regulating the Microstructure by Rheo-Die-Casting. Metals, 13(5), 968. https://doi.org/10.3390/met13050968

Vancouver

Hu Z, Huo Q, Chen Y, Liu M, Chen X. Improving Mechanical Property of Hyper-Eutectic Al-Si Alloys via Regulating the Microstructure by Rheo-Die-Casting. Metals. 2023;13(5):968. doi:10.3390/met13050968

BibTeX
@article{Hu2023,
  author = {Hu, Zhaohua and Huo, Qile and Chen, Yaxin and Liu, Manping and Chen, Xuefei},
  title = {Improving Mechanical Property of Hyper-Eutectic Al-Si Alloys via Regulating the Microstructure by Rheo-Die-Casting},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {5},
  pages = {968},
  doi = {10.3390/met13050968}
}
Kostenlos starten →