EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Study on Interfacial Structure and Mixing Characteristics in Converter Based on CLSVOF Method

Fengsheng Qi, Shuqi Zhou, Liangyu Zhang, Zhongqiu Liu, Sherman C. P. Cheung, Baokuan Li

Metals · 02.05.2023 · 13 (5) · 880

DOI: 10.3390/met13050880 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 02.05.2023. Verfasst von Fengsheng Qi und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The National Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The blowing flow is a key factor in molten bath stirring to affects the steel-bath interface fluctuation and chemical reaction in the top-bottom-blowing converter. The Volume of Fluid (VOF) method is widely used to capture the gas-liquid interface. However, some limitations exist in dealing with the interface curvature and normal vectors of the complex deformed slag-bath interface. The Coupled Level-Set and Volume of Fluid (CLSVOF) method uses the VOF function to achieve mass conservation and capture interface smoothly by computing the curvature and normal vector using the Level-Set function to overcome the limitations in the VOF model. In the present work, a three-dimensional (3D) transient mathematical model coupled CLSVOF method has been developed to analyze the mixing process under different injection flow rates and bottom-blowing positions. The results show that when the bottom-blowing flow rate increases from 0.252 kg/s to 0.379 kg/s, the mixing time in the molten bath gradually decreases from 74 s to 66 s. When the bottom-blowing flow rate is 0.252 kg/s, it is recommended to distribute the outer bottom-blowing position on concentric circles with Dtuy,2/D2 = 0.33.

Förderung

  • The National Science Foundation of China

Zitieren

APA

Qi, F., Zhou, S., Zhang, L., Liu, Z., Cheung, S. C. P., & Li, B. (2023). Numerical Study on Interfacial Structure and Mixing Characteristics in Converter Based on CLSVOF Method. Metals, 13(5), 880. https://doi.org/10.3390/met13050880

Vancouver

Qi F, Zhou S, Zhang L, Liu Z, Cheung SCP, Li B. Numerical Study on Interfacial Structure and Mixing Characteristics in Converter Based on CLSVOF Method. Metals. 2023;13(5):880. doi:10.3390/met13050880

BibTeX
@article{Qi2023,
  author = {Qi, Fengsheng and Zhou, Shuqi and Zhang, Liangyu and Liu, Zhongqiu and Cheung, Sherman C. P. and Li, Baokuan},
  title = {Numerical Study on Interfacial Structure and Mixing Characteristics in Converter Based on CLSVOF Method},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {5},
  pages = {880},
  doi = {10.3390/met13050880}
}
Kostenlos starten →