EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Literature Review on Thermomechanical Modelling and Analysis of Residual Stress Effects in Wire Arc Additive Manufacturing

Fakada Dabalo Gurmesa, Hirpa Gelgele Lemu

Metals · 05.03.2023 · 13 (3) · 526

DOI: 10.3390/met13030526 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 05.03.2023. Verfasst von Fakada Dabalo Gurmesa und 1 weiteren Autor:innen. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 152 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NORHED II Program, Institutional Network for Design and Manufacturing Education and Training (INDMET).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The wire arc additive manufacturing (WAAM) process is a 3D metal-printing technique that builds components by depositing beads of molten metal wire pool in a layer-by-layer style. Even though manufactured parts commonly suffer from defects, the search to minimize defects in the product is a continuing process, for instance, using modeling techniques. In areas where thermal energy is involved, thermomechanical modeling is one of the methods used to determine the input thermal load and its effect on the products. In the WAAM fabrication process, the thermal load is the most significant cause of residual stress due to the extension and shrinkage of the molten pool. This review article explores the thermomechanical effect and stress existing in WAAM-fabricated parts due to the thermal cycles and other parameters in the process. It focuses on thermomechanical modeling and analysis of residual stress, which has interdependence with the thermal cycle, mechanical response, and residual stress in the process during printing. This review also explores some methods for measuring and minimizing the residual stress during and after the printing process. Residual stress and distortion associated with many input and process parameters that are in complement to thermal cycles in the process are discussed. This review study concludes that the thermal dependency of material characterization and process integration for WAAM to produce structurally sound and defect-free parts remain central issues for future research.

Förderung

  • NORHED II Program, Institutional Network for Design and Manufacturing Education and Training (INDMET)

Zitieren

APA

Gurmesa, F. D., & Lemu, H. G. (2023). Literature Review on Thermomechanical Modelling and Analysis of Residual Stress Effects in Wire Arc Additive Manufacturing. Metals, 13(3), 526. https://doi.org/10.3390/met13030526

Vancouver

Gurmesa FD, Lemu HG. Literature Review on Thermomechanical Modelling and Analysis of Residual Stress Effects in Wire Arc Additive Manufacturing. Metals. 2023;13(3):526. doi:10.3390/met13030526

BibTeX
@article{Gurmesa2023,
  author = {Gurmesa, Fakada Dabalo and Lemu, Hirpa Gelgele},
  title = {Literature Review on Thermomechanical Modelling and Analysis of Residual Stress Effects in Wire Arc Additive Manufacturing},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {3},
  pages = {526},
  doi = {10.3390/met13030526}
}
Kostenlos starten →