A Predictive Methodology for Temperature, Heat Generation and Transfer in Gigacycle Fatigue Testing
Metals · 28.02.2023 · 13 (3) · 492
DOI: 10.3390/met13030492 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 28.02.2023. Verfasst von Felipe Klein Fiorentin und 4 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FEDER and National Funds (FCT), Plano de Recuperação e Resiliência (PRR), República Portuguesa.
Abstract (Originalsprache)
Recently, a trend in fatigue testing related to increasing excitation frequencies during experiments has been observed. This tendency is a product of both necessity and available technological capabilities. Regarding the last, advances in control and excitation systems made it possible to perform tests at impressive frequencies, beyond the tenths of kHz. Performing fatigue tests much faster is indeed very motivating, representing less time and money spent. On the other hand, such high testing frequencies create some challenges, such as the requirement of measurement systems capable of working with high sample rates and excessive heat generation on the testing samples. The last one is especially critical for fatigue once the mechanical properties, such as the elasticity modulus and yield strength, are highly dependent on the temperature. Therefore, being able to predict and control the sample temperature during fatigue testing is essential. The main goal of the present work is to provide a formulation for estimating the heat generation and specimen temperature during high frequency testing, namely in the ultra-high cycle fatigue (UHCF) regime. Several metallic alloys and specimen geometries were tested, and the model results were compared with experimental temperature measurements. The developed model was able to properly characterize the temperature trend over time. In addition, a script was developed and made publicly available.
Förderung
- FEDER and National Funds (FCT)
- Plano de Recuperação e Resiliência (PRR), República Portuguesa
Zitieren
APA
Fiorentin, F. K., Reis, L., Lesiuk, G., Reis, A., & Jesus, A. D. (2023). A Predictive Methodology for Temperature, Heat Generation and Transfer in Gigacycle Fatigue Testing. Metals, 13(3), 492. https://doi.org/10.3390/met13030492
Vancouver
Fiorentin FK, Reis L, Lesiuk G, Reis A, Jesus AD. A Predictive Methodology for Temperature, Heat Generation and Transfer in Gigacycle Fatigue Testing. Metals. 2023;13(3):492. doi:10.3390/met13030492
BibTeX
@article{Fiorentin2023,
author = {Fiorentin, Felipe Klein and Reis, Luis and Lesiuk, Grzegorz and Reis, Ana and Jesus, Abílio de},
title = {A Predictive Methodology for Temperature, Heat Generation and Transfer in Gigacycle Fatigue Testing},
journal = {Metals},
year = {2023},
volume = {13},
number = {3},
pages = {492},
doi = {10.3390/met13030492}
}
EUVIMED