EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corrosion of Titanium Alloys Anodized Using Electrochemical Techniques

Jesús Manuel Jáquez-Muñoz, Citlalli Gaona-Tiburcio, Ce Tochtli Méndez-Ramírez, Miguel Ángel Baltazar-Zamora, Francisco Estupinán-López, Raul German Bautista-Margulis, Josefina Cuevas-Rodríguez, Juan Pablo Flores-De los Rios, Facundo Almeraya-Calderón

Metals · 24.02.2023 · 13 (3) · 476

DOI: 10.3390/met13030476 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 24.02.2023. Verfasst von Jesús Manuel Jáquez-Muñoz und 8 weiteren Autor:innen. Die Arbeit wurde bisher 44-mal zitiert (Crossref) und nennt 93 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Mexican National Council for Science and Technology (CONACYT), Universidad Autónoma de Nuevo León (UANL).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The anodization of titanium has been an excellent option for protecting titanium and its alloys from corrosive environments such as acids and chloride systems, by generating a homogenous oxide layer. The objective of the current investigation was to evaluate the electrochemical corrosion behavior of alloys Ti-6Al-2Sn-4Zr-2Mo and Ti-6Al-4V anodized in 1M H2SO4 and H3PO4 solutions at a current density of 2.5 × 10–3 A/cm2. The anodization’s electrochemical characterization was achieved in NaCl and H2SO4 at 3.5% wt. electrolytes. Scanning electron microscopy (SEM) was employed to determine the anodized thickness and morphology. Cyclic potentiodynamic polarization (CPP) and electrochemical impedance spectroscopy (EIS), based on ASTM G61-86 and G106-15 Standards, were the electrochemical techniques mainly employed. The anodized samples presented a change in Ecorr values and a higher passivation zone. The EIS plot showed a higher resistance for samples anodized in H3PO4 and Ti-6Al-2Sn-4Zr-2Mo.

Förderung

  • Mexican National Council for Science and Technology (CONACYT)
  • Universidad Autónoma de Nuevo León (UANL)

Zitieren

APA

Jáquez-Muñoz, J. M., Gaona-Tiburcio, C., Méndez-Ramírez, C. T., Baltazar-Zamora, M. Á., Estupinán-López, F., Bautista-Margulis, R. G., Cuevas-Rodríguez, J., Rios, J. P. F. L., & Almeraya-Calderón, F. (2023). Corrosion of Titanium Alloys Anodized Using Electrochemical Techniques. Metals, 13(3), 476. https://doi.org/10.3390/met13030476

Vancouver

Jáquez-Muñoz JM, Gaona-Tiburcio C, Méndez-Ramírez CT, Baltazar-Zamora MÁ, Estupinán-López F, Bautista-Margulis RG, et al. Corrosion of Titanium Alloys Anodized Using Electrochemical Techniques. Metals. 2023;13(3):476. doi:10.3390/met13030476

BibTeX
@article{JquezMuoz2023,
  author = {Jáquez-Muñoz, Jesús Manuel and Gaona-Tiburcio, Citlalli and Méndez-Ramírez, Ce Tochtli and Baltazar-Zamora, Miguel Ángel and Estupinán-López, Francisco and Bautista-Margulis, Raul German and Cuevas-Rodríguez, Josefina and Rios, Juan Pablo Flores-De los and Almeraya-Calderón, Facundo},
  title = {Corrosion of Titanium Alloys Anodized Using Electrochemical Techniques},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {3},
  pages = {476},
  doi = {10.3390/met13030476}
}
Kostenlos starten →