EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Linear Thermal Expansion and Specific Heat Capacity of Cu-Fe System Laser-Deposited Materials

Konstantin I. Makarenko, Oleg N. Dubinin, Igor V. Shishkovsky

Metals · 22.02.2023 · 13 (3) · 451

DOI: 10.3390/met13030451 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 22.02.2023. Verfasst von Konstantin I. Makarenko und 2 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The coefficient of linear thermal expansion and the specific heat capacity of laser-deposited Cu-Fe alloys fabricated from tin, aluminum, chromium bronze (89–99 wt.% Cu), and SS 316L were studied. The investigated alloys had a 1:1 and a 3:1 bronze–steel ratio. The Al–bronze-based alloy showed the lowest value of linear thermal expansion coefficient: (1.212 ± 0.095)∙10−5 K−1. Contrarily, this value was the highest {[(1.878–1.959) ± 0.095]∙10−5 K−1} in the case of functionally graded parts created from alternating layers of bronze and steel. Differential scanning calorimetry provided experimental results about the specific heat capacity of the materials. In the case of Al–bronze-based specimens, it demonstrated a decrease in the specific heat capacity until ~260 °C and its further increase during a heating cycle. Exothermic peaks related to polymorphic transformations were observed in the Al–bronze-based specimens. Cooling cycles showed monotonous behavior for specific heat capacities. It had exothermic peaks in the case of Cr–bronze-based alloys. A Lennard-Jones potential equation was used for testing the relation between heat capacity and thermal expansion. A three-way interaction regression model validated the results and provided the relative thermal expansion of commercially pure DED-fabricated SS 316L. Its specific heat capacity was also studied experimentally and was 15–20% higher in comparison to the traditional method of production.

Zitieren

APA

Makarenko, K. I., Dubinin, O. N., & Shishkovsky, I. V. (2023). Linear Thermal Expansion and Specific Heat Capacity of Cu-Fe System Laser-Deposited Materials. Metals, 13(3), 451. https://doi.org/10.3390/met13030451

Vancouver

Makarenko KI, Dubinin ON, Shishkovsky IV. Linear Thermal Expansion and Specific Heat Capacity of Cu-Fe System Laser-Deposited Materials. Metals. 2023;13(3):451. doi:10.3390/met13030451

BibTeX
@article{Makarenko2023,
  author = {Makarenko, Konstantin I. and Dubinin, Oleg N. and Shishkovsky, Igor V.},
  title = {Linear Thermal Expansion and Specific Heat Capacity of Cu-Fe System Laser-Deposited Materials},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {3},
  pages = {451},
  doi = {10.3390/met13030451}
}
Kostenlos starten →